Chainsaw Repair

For Sale - Wanted - Trades - Swaps - Stolen - Recalls - Lost => Locked Sale and Wanted threads => Topic started by: Cut4fun . on September 15, 2011, 12:34:27 pm

Title: Clinton D-55 D55 chainsaw with oem rollernose bar
Post by: Cut4fun . on September 15, 2011, 12:34:27 pm
MANUFACTURED BY: CLINTON MACHINE COMPANY CLINTON, MICHIGAN, U.S.A. 1959-1964

http://www.acresinternet.com/cscc.nsf/e ... enDocument

I bought this Clinton D55 for the rollernose bar on it, but after figuring out it was all original, I just cant part them if a collector out there wants it whole.

I decided not to separate the saw and rollernose bar (I was going to cut bar up to make a race bar out of it). Some collector somewhere will appreciate that. Plus the D55 I have looked at all had solid nose bar or PHO. This is the first one I seen to match the ad on acres site with the rollernose.
Recoil rope reinstalled. New HL carb kit and air filter to carb hose installed.

Pulled the fuel peacock and ran all new lines inside tank and from carb to peacock. Looks to be original fuel filter in it still. Installed all new lines and fuel filter.

The chain was a oregon 51 .404 058 and there is no markings I can find on the oem Clinton bar.

Had saw running and made 3 cuts with it in some poplar I had on hand. Saw still needed to have carb primed after setting over a day. Saw now resides on a shelf being I have no interest in them.

Only missing little metal spark plug cover now and noticed a little patched hole pin size with jb in fuel tank on lower right side.

Will trade for the right smaller modern chainsaw and open for offers with or without rollernose bar or $90 complete plus shipping.

(http://i59.photobucket.com/albums/g289/doemaster789/Clinton268272xp/D55hognosebar001.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/Clinton268272xp/D55hognosebar002.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/Clinton268272xp/D55hognosebar003.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/Clinton268272xp/D55hognosebar004.jpg)

Title: Re: Clinton D-55 D55 chainsaw with oem rollernose bar
Post by: Cut4fun . on November 03, 2011, 05:35:36 pm
GONE traded off