Chainsaw Repair

Chain - Grinders - Filing - Wood Milling - Tools - Welding - Machinist - Mowers - Tillers => Chain - Bars - Grinders - Filing => Topic started by: jmester on March 19, 2015, 08:31:32 pm

Title: Oregon 404 8t rim sprocket.
Post by: jmester on March 19, 2015, 08:31:32 pm
 Was looking to find a 404 8 tooth rim. Checked Stihl NLA. Then Oregon the same NLA. Found that danzco has them. Searched the Oregon part number and found that chainsawr has some. Got one on the way. So for any one looking for some now maybe the time to find them. 
Title: Re: Oregon 404 8t rim sprocket.
Post by: Cut4fun . on March 19, 2015, 08:33:51 pm
Bet I know where one new one is.  ;)
Title: Re: Oregon 404 8t rim sprocket.
Post by: jmester on March 19, 2015, 08:36:53 pm
Let me guess in your garage
Title: Re: Oregon 404 8t rim sprocket.
Post by: jmester on March 19, 2015, 08:39:51 pm
Cut do you think a mm 084 will pull a 9 pin gear. Running a 30" bar
Title: Re: Oregon 404 8t rim sprocket.
Post by: Cut4fun . on March 19, 2015, 09:01:58 pm
9T 3/8?   It will but I wouldnt. 
Title: Re: Oregon 404 8t rim sprocket.
Post by: Cut4fun . on March 19, 2015, 09:02:46 pm
Let me guess in your garage

In a bin with others. Had some 084 166 404 stuff.
Title: Re: Oregon 404 8t rim sprocket.
Post by: Cut4fun . on March 19, 2015, 09:05:26 pm
Wonder why they are discontinued  http://store.chainsawr.com/products/new-oregon-rim-sprocket-13313-404-8-tooth-sd7-spline
Title: Re: Oregon 404 8t rim sprocket.
Post by: 660magnum on March 19, 2015, 09:26:25 pm
Even a 7 tooth "404" sprocket is almost as big around as a 8 tooth 3/8" rim. So a 8 tooth "404" is pretty good size.
Title: Re: Oregon 404 8t rim sprocket.
Post by: man of stihl on March 20, 2015, 05:29:32 am
http://www.ebay.com/itm/12590-Lot-of-10-Chain-Saw-Rim-Sprockets-404-8-tooth-STD-7-spline-RST-404-8-/291362991264?pt=LH_DefaultDomain_0&hash=item43d6966ca0
Title: Re: Oregon 404 8t rim sprocket.
Post by: jmester on March 20, 2015, 06:24:47 am
It is 404 9 pin danzco. Think I will just run the 8 pin when it gets here. Not sure why they would discontinue them unless there just is not a whole lot of demand or sales of them.
Title: Re: Oregon 404 8t rim sprocket.
Post by: 660magnum on March 20, 2015, 07:20:28 am
Even to get 404 chain around here you have to order it.
Title: Re: Oregon 404 8t rim sprocket.
Post by: Cut4fun . on March 20, 2015, 12:56:10 pm
JMO no way would I try a 404 9T on a stock mm 084.   
Title: Re: Oregon 404 8t rim sprocket.
Post by: jmester on March 20, 2015, 03:56:39 pm
Think you are right just run the 8t no need to beat on it that hard.
Title: Re: Oregon 404 8t rim sprocket.
Post by: jmester on March 20, 2015, 03:57:48 pm
My local dealer stocks it for a couple of guys with firewood processors. Other wise I would need to order it as well.
Title: Re: Oregon 404 8t rim sprocket.
Post by: Cut4fun . on March 20, 2015, 06:40:22 pm
So was you able to get one local without paying $10 for a rim online and prob close to that again in shipping?   
I was figuring they were $5 rims and I think mine may be stihl rim.
Title: Re: Oregon 404 8t rim sprocket.
Post by: jmester on March 20, 2015, 08:03:59 pm
Got one from chainsawr. Checked around local but no body had one.
Title: Re: Oregon 404 8t rim sprocket.
Post by: Cut4fun . on March 22, 2015, 01:07:32 pm
crap 2nd time I have been out and forgot to check for it.

Just got back in from weed-eating around house.  My way of removing the old dead flower stems etc after their use for birds for seeds etc during winter.
Title: Re: Oregon 404 8t rim sprocket.
Post by: jmester on March 22, 2015, 01:13:09 pm
No rush on my end. I know you will get there at some point. Always a lot to do coming out of winter. Thanks
Title: Re: Oregon 404 8t rim sprocket.
Post by: Cut4fun . on March 22, 2015, 03:58:03 pm
I was wrong. Oregon Powermate rim  .404 8   new as new can be but can see I made a test cut with it. No wear, just can tell a chain had been across it for testing.

(http://i59.photobucket.com/albums/g289/doemaster789/Deer%20Cam/oregonrim%20004_zpstywtqnmp.jpg) (http://s59.photobucket.com/user/doemaster789/media/Deer%20Cam/oregonrim%20004_zpstywtqnmp.jpg.html)
(http://i59.photobucket.com/albums/g289/doemaster789/Deer%20Cam/oregonrim%20006_zpsaigqjoz2.jpg) (http://s59.photobucket.com/user/doemaster789/media/Deer%20Cam/oregonrim%20006_zpsaigqjoz2.jpg.html)
Title: Re: Oregon 404 8t rim sprocket.
Post by: jmester on March 22, 2015, 07:54:43 pm
Looks good to me.