Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Poulan => Topic started by: pete on April 01, 2015, 07:32:37 am

Title: poulan xx parts interchangeability
Post by: pete on April 01, 2015, 07:32:37 am

Hi all a friend dropped by today with a nice little poulan xx he scored at a swapmeet and wanted to know if I had a flywheel and starter dogs   I have some xxv poulans  will any parts change over I know very little of the poulans just grab them as trade material if I see them cheap thanks

Title: Re: poulan xx parts interchangeability
Post by: Cut4fun . on April 02, 2015, 01:15:46 pm

My post didnt post yesterday  ??? .

I had IPL's for XX 20 20D XXV older and XXV micro.   Just compare the IPL's and part numbers and you should get your info.

Title: Re: poulan xx parts interchangeability
Post by: Eccentric on April 02, 2015, 03:21:22 pm

Don't think there's much of anything that swaps between the XX series and either the Micro series or the XXV series.  They flywheel and starter parts are most likely unique to the XX.  The starter system on those is very different from what's on the other two families.

I have seen some listings in catalogs (such as Oregon) that show the same clutch drum working for the XX and Micro series, but I have yet to verify it. 

The bar mount is the same between the three saw families.....

Title: Re: poulan xx parts interchangeability
Post by: pete on April 02, 2015, 08:24:00 pm

Thanks guys will try get those ipls up to view

Title: Re: poulan xx parts interchangeability
Post by: Eccentric on April 02, 2015, 11:06:12 pm

Try www.barrettsmallengine.com for the IPL's.  The IPL's for the XX saws are listed as "20" and "20D".

http://www.barrettsmallengine.com/poulan/chainsawpartslist.html

Title: Re: poulan xx parts interchangeability
Post by: pete on April 03, 2015, 07:47:55 am

Thanks will check it out

Title: Re: poulan xx parts interchangeability
Post by: dthorn on May 29, 2021, 07:23:25 pm

I know this is a late response.

I have the same saw and after cleaning, replacing fuel and oil lines, the fuel leaks right out of the fuel rez and runs out the oiler hose.  Any hope or help?