Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Poulan => Topic started by: AmericanPsycho on May 23, 2015, 07:16:14 am

Title: 2300 Muffler
Post by: AmericanPsycho on May 23, 2015, 07:16:14 am
How do I remove the muffler on my 2300?
Title: Re: 2300 Muffler
Post by: Cut4fun . on May 23, 2015, 10:01:10 am
Thats a easy muffler to remove.  Should be a outer cover bolt going through both halves, then bolt holding on back half.

Poulan 2300av 2300cva 2350cva IPL  http://www.poulan.com/ddoc/POUI/POUI1996_USen/POUI1996_USen__530064828.pdf
Title: Re: 2300 Muffler
Post by: Cut4fun . on May 23, 2015, 10:11:13 am
Yep that is super easy one IMO.


(https://scontent-ord1-1.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/18599_1051725191522553_6842798883687715609_n.jpg?oh=a5be684309ac6949a91dd14060ac0979&oe=5604AE34)
Title: Re: 2300 Muffler
Post by: AmericanPsycho on May 23, 2015, 10:53:58 am
Thanks, Kevin 8)

The cover just needed a light tap to get it off. I don't think this 2300 has seen much use. Not the slightest bit of discoloration on the piston or in side the cylinder.
Title: Re: 2300 Muffler
Post by: leec on August 07, 2015, 04:45:49 pm
These 2300 do have some attitude! Good simple little saws to work on as well.