Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Husqvarna => Topic started by: Jason K on July 22, 2015, 09:07:45 am

Title: 372xp on a 362xp will it work
Post by: Jason K on July 22, 2015, 09:07:45 am
I have a nice 372xp carb. I was wondering if it would work on my 362xp

Thanks
Jason
Title: Re: 372xp on a 362xp will it work
Post by: mdavlee . on July 22, 2015, 09:57:48 am
It should. Which intake ste up do you have?
Title: Re: 372xp on a 362xp will it work
Post by: 660magnum on July 22, 2015, 11:15:30 am
The standard carb for the non XT  372XP, 365 Special, and the 362's is the Walbro HD12B.

There's a Zama you see on the 365's sometime and it runs about the same as HD12B on all of them

http://www.baileysonline.com/Chainsaw-Parts/Carburetors-Kits/Walbro-Carburetors-for-Husqvarna-Chainsaws/Walbro-HD-12B-1-Carburetor-for-Husqvarna-362-365-371-372-XP-Jonsered-2163-2171-Chainsaws-503281805-503-28-18-05.axd
Title: Re: 372xp on a 362xp will it work
Post by: Jason K on July 23, 2015, 02:23:16 pm
Ok thanks guys..

Thanks
Jaaon
Title: Re: 372xp on a 362xp will it work
Post by: David Young on July 27, 2015, 03:26:38 pm
what happened to the 362 jug? is it still good?

David
Title: Re: 372xp on a 362xp will it work
Post by: SawTroll on August 07, 2015, 03:25:58 pm
The standard carb for the non XT  372XP, 365 Special, and the 362's is the Walbro HD12B.

There's a Zama you see on the 365's sometime and it runs about the same as HD12B on all of them

http://www.baileysonline.com/Chainsaw-Parts/Carburetors-Kits/Walbro-Carburetors-for-Husqvarna-Chainsaws/Walbro-HD-12B-1-Carburetor-for-Husqvarna-362-365-371-372-XP-Jonsered-2163-2171-Chainsaws-503281805-503-28-18-05.axd

As I remember it, the Zama has only a 17.0 mm venturi - more than the 16.67 mm HD-6, but less than the HD-12 (17.5 mm). All those carbs were used on those saws, on various versions.

A properly ported 372xp really needs a 19 mm+ carb, according to my brother - but that's a different story, that involves more.
Title: Re: 372xp on a 362xp will it work
Post by: Jason K on August 18, 2015, 08:32:33 am
The jug on the 372xpw is in mint shape. The pistion on the other hand as a hole threw it on the top. So I put on the used p&c seems to run good,but near the power od the 372xpw. He gave the 372xpw cylinder. I am thinking of putting it on my 362xp will it work. Plus I have the old j red 2165 carb on mint shape will that work on it too

Thanks
Jason
Title: Re: 372xp on a 362xp will it work
Post by: 660magnum on August 18, 2015, 11:52:56 am
it'l work
Title: Re: 372xp on a 362xp will it work
Post by: Jason K on August 18, 2015, 07:13:01 pm
It is out of a 2007 saw 372XPW and my 362xp is a 2006. I was wondering is there a special part number for the 2007 372xpw pistion kit or what one would be the best. Please give part number.


Thanks
Jason
Title: Re: 372xp on a 362xp will it work
Post by: Cut4fun . on August 18, 2015, 07:46:17 pm
Sure you got a 75cc and not 71cc?  I have read not all were 75cc just because it was xpw.  Never seen proof of it just read it. So just in case. ;)
Title: Re: 372xp on a 362xp will it work
Post by: Cut4fun . on August 18, 2015, 07:50:25 pm
If you want to measure. 75cc is 51.44mm bore 74.66cc

aftermarket 52mm
Title: Re: 372xp on a 362xp will it work
Post by: Cut4fun . on August 18, 2015, 07:53:38 pm
Husqvarna 503 97 61-71 OEM Piston Assembly 51.4mm for 372XPW  375K  503976171
Title: Re: 372xp on a 362xp will it work
Post by: SawTroll on August 19, 2015, 11:55:35 am
Sure you got a 75cc and not 71cc?  I have read not all were 75cc just because it was xpw.  Never seen proof of it just read it. So just in case. ;)
That's correct -  most xpws actually are 71cc, it is the 2006 - 2009 US sold ones that are 75cc. The 75cc cylinder isn't as nicely ported as the 71cc ones - at least not stock.
Title: Re: 372xp on a 362xp will it work
Post by: Jason K on September 06, 2015, 12:05:32 am
Sorry I did not back too you all sooner. Been very busy at work, cutting wood and plus my son is home from the navy for two weeks. He just flew in last night. Thanks for all the help if I can convert my 362 on a 372xpw darn wright I am  going to do it. ;)


Jason
Title: Re: 372xp on a 362xp will it work
Post by: Jason K on September 07, 2015, 04:09:14 pm
My other son is doing alot better after a dunk driver hit him this early summer.
Title: Re: 372xp on a 362xp will it work
Post by: Cut4fun . on September 07, 2015, 06:40:03 pm
Dang sorry to here that happen.  Hope he has 100% recovery.