Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Chainsaws not listed - Gas OPE => Topic started by: ejbrandt on July 31, 2015, 07:23:56 pm

Title: Parts For Montgomery Ward Powr Kraft
Post by: ejbrandt on July 31, 2015, 07:23:56 pm
New to this forum:
I have a MW Powr Kraft 2.8 ci that I need parts for.  I need parts for the recoil starter mechanism.  Any help would be appreciated.   
I attached some pictures
Title: Re: Parts For Montgomery Ward Powr Kraft
Post by: dannyupsolate on July 31, 2015, 09:32:44 pm
show us a picture of the whole saw my riding mower power kraft is a cast iron briggs my montgomery ward metal lathe is a logan. maybe your saw is better known by another name.
Title: Parts For Montgomery Ward Powr Kraft
Post by: 67L36Driver on August 01, 2015, 07:26:24 am
Quote from: ejbrandt on July 31, 2015, 07:23:56 pm
New to this forum:
I have a MW Powr Kraft 2.8 ci that I need parts for.  I need parts for the recoil starter mechanism.  Any help would be appreciated.   
I attached some pictures

Your pictures arn't showing up but, Remington made saws back in the day for Wards.  2.8" is maybe an SL-9/10 type.  46 or 50 cc
Title: Re: Parts For Montgomery Ward Powr Kraft
Post by: ejbrandt on August 01, 2015, 08:50:40 am
Let me try with the pic's again
Title: Re: Parts For Montgomery Ward Powr Kraft
Post by: 660magnum on August 01, 2015, 09:38:27 am
I have not come up with any connection so far?
Title: Parts For Montgomery Ward Powr Kraft
Post by: 67L36Driver on August 01, 2015, 11:03:49 am
Wards 4.0"/ Remington SL-11.
A 2.8 will look very similar.

Crap!  Pics not working at all!!!
Title: Re: Parts For Montgomery Ward Powr Kraft
Post by: Cut4fun . on August 01, 2015, 03:13:02 pm
Fairbanks morse  friction recoil?  http://chainsawrepair.createaforum.com/chainsaws-not-listed/remington-pl-5-powerlite-chainsaw/msg11713/#msg11713
Title: Re: Parts For Montgomery Ward Powr Kraft
Post by: Cut4fun . on August 01, 2015, 03:14:38 pm
Others that the starter parts fit from.  Fairbanks morse type friction shoe kit

Remington and Remington Built Montgomery Wards. 4.0, 4.1, 5.0, 4.6 Powr Kraft.  SL-4, SL-5, PL-4, PL-5 and others.
Title: Re: Parts For Montgomery Ward Powr Kraft
Post by: Cut4fun . on August 01, 2015, 03:15:41 pm
(http://i59.photobucket.com/albums/g289/doemaster789/Projects/remingtonPL5001_zpsbe9169b5.jpg)
Title: Re: Parts For Montgomery Ward Powr Kraft
Post by: 67L36Driver on August 03, 2015, 06:29:19 pm

Quote from: Cut4fun . on August 01, 2015, 03:14:38 pm
Others that the starter parts fit from.  Fairbanks morse type friction shoe kit

Remington and Remington Built Montgomery Wards. 4.0, 4.1, 5.0, 4.6 Powr Kraft.  SL-4, SL-5, PL-4, PL-5 and others.

The SL-5 is the old Mall GP/Remington Logmaster design. 
Title: Re: Parts For Montgomery Ward Powr Kraft
Post by: Eccentric on August 04, 2015, 12:57:32 am
I have a Wards Power Kraft 2.8 like that.  It's a rebadged Remington SL-9.  Does indeed have a small Fairbanks-Morse friction starter.  Smallest FM setup that I've seen.  At least 25% smaller than the FM setups I've seen on old Homelites, Stihls, Monos, and others...