Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Echo => Topic started by: Cut4fun . on September 02, 2015, 02:35:45 pm
-
Suppose to have one coming in to service. Just trying to learn about and see what they are. echo 550
http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/ae35de2baeb23f0d88256d0c006d41e1?OpenDocument
-
Is this the same saw as the echo 550 evl? http://chainsawrepair.createaforum.com/echo/john-deere-55/msg58542/#msg58542
Just wanted to confirm my earlier findings?
-
Hi Kevin,
550evl and 55ev are the same. 550vl and 55v are the same.
Carb should be a HDA-14B K22-HDA. Ignitions are the nemisis. That module will fail (ask me how I know). Hopefully not what you are up against. I did get some odds and ends through Echo. Some stuff is still available.
Cory
-
Good to know and Thanks.
Nope this one runs still and back out. Just needed new bar and chain. D176 and full 3/8 70DL.
-
Had another echo 550 evl in today. Thing looked like new still.
Ran fine and needed nothing I could find IMO. No charge and sent him back with saw.
44 mm (1.65 in.) bore
36 mm (1.42 in.) stroke
I would think they would lug pretty good for a small cc saw with that stroke.