Chainsaw Repair

Chain - Grinders - Filing - Wood Milling - Tools - Welding - Machinist - Mowers - Tillers => Chain - Bars - Grinders - Filing => Topic started by: Cut4fun . on September 24, 2015, 04:16:47 pm

Title: Remington rollernose bar
Post by: Cut4fun . on September 24, 2015, 04:16:47 pm
Was wondering about this bar today.  Sooooo I thought I would see. First guess was a bingo.

Remington rollernose bar.

Figured out it will work on lg husky mounts D009.   :o ;D

Pic on top of D009 bar.

(http://chainsawrepair.createaforum.com/index.php?action=dlattach;topic=5107.0;attach=15217;image)
Title: Re: Remington rollernose bar
Post by: Cut4fun . on September 24, 2015, 07:37:21 pm
I know Aaron gave some info on this mount. But I cant find it.   :-[


Saving info.

25.5" total length and chipper style chain was 78DL.


In middle of belly of bar, running rollernose to mount wise. Not down by mount area like I am use to seeing.

CAT . NO . A 1017 LF

The chain is  78DL  and bar 058.

67L36Driver =  A-1017 is a nominal 23" roller nose.
Most longer Remy bars (over 18") are .058" guage.
The 20s and 24s I have are .058.

(http://i59.photobucket.com/albums/g289/doemaster789/Projects/alamilllogwiz025%20012_zpsvxcdt9wy.jpg)
Title: Re: Remington rollernose bar
Post by: Cut4fun . on October 31, 2017, 08:38:08 pm
First etched in engraved Remington roller nose bar I have had.  Just a regular looking mount unlike that last one.