Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Dolmar Makita => Topic started by: Cut4fun . on January 27, 2016, 03:37:14 pm


Title: Dolmar crankshaft
Post by: Cut4fun . on January 27, 2016, 03:37:14 pm
Dolmar 6400 7300 7900 7910 etc cranks. Anyone seen them cracking?

2 out of 3 were good but a 3rd one was **** at 12 o'clock from pin out.  No pic of 3rd crank being it was no good and not sent to me.

(http://i59.photobucket.com/albums/g289/doemaster789/570/dolmar7900parts%20002_zps6zzvze7d.jpg)
Title: Re: Dolmar crankshaft
Post by: Cut4fun . on January 30, 2016, 08:11:05 pm
Crank above in this crankcase now.  Tractorsaw1   Glad to have been able to help and that you had a crank I wanted too.  8)

What was wrong with the crank you replaced?

(http://uploads.tapatalk-cdn.com/20160130/b50db703c257de099c3cd7bbfd6ba28f.jpg)
Title: Re: Dolmar crankshaft
Post by: Tractorsaw1 on January 31, 2016, 09:38:38 pm
Big end bearing was bad. Didn't get to finish yet. Too much going on
Title: Re: Dolmar crankshaft
Post by: Chainsawr on February 04, 2016, 07:11:39 am
Yes.