Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Echo => Topic started by: jr27236 on February 24, 2016, 10:36:43 pm
-
So I picked up a used cs340 and it has a small hole in the front of the tank. I cleaned it up with a Dremel bit and was going to use Jbweld but before doing great so wanted to get some input from those who may of made this repair before. I want to make sure of the right product to use that will resist exposure to gas. (http://uploads.tapatalk-cdn.com/20160225/5da8acbffb0e05092c9663c043a8d074.jpg)
-
I would ( this is what I do) mold in Quiksteel, let set. The I would coat with SealAll and let set.
quiksteel I use http://bluemagicusa.com/index.php/blue_magic/products/164/
sealall http://eclecticproducts.com/seal-all.html
The rest of quiksteel http://bluemagicusa.com/index.php/blue_magic/category/27/