Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Jonsered => Topic started by: deezlfan on March 16, 2016, 10:26:51 am

Title: Anyone know where to get gasket sets/seals for Jonsered?
Post by: deezlfan on March 16, 2016, 10:26:51 am

Lots of these kits are NLA from OEM. Any AM being produced? Main focus right now is 2077/2083.

Title: Re: Anyone know where to get gasket sets/seals for Jonsered?
Post by: Cut4fun . on March 16, 2016, 12:21:13 pm

There is a thread here on where the crankcase gaskets being sold (I cant remember off hand).  The older PTO seal NLA, Update is to the PTO. bearing seal set like on poulan 505 445 425. Flywheel seal was husky 372 seal (thats what I use oem and aftermarket). Cylinder gasket NLA, but I was told look at the husky 385 gasket to see if it could be used for oem.

Title: Re: Anyone know where to get gasket sets/seals for Jonsered?
Post by: weimedog on March 18, 2016, 10:42:46 am

I have one too that needs case seals and a intake boot. :(  Have to scorched top ends. Both salvageable I guess but no sense in putting one together unless I can seal it up! I was able to use 1194 on one for a cylinder /  base gasket. Squish ended up around .022in

Title: Re: Anyone know where to get gasket sets/seals for Jonsered?
Post by: Cut4fun . on March 20, 2016, 09:58:18 am

Page 11 if you have your pages set like me. Poulan and Jonsered part number http://chainsawrepair.createaforum.com/poulan/poulan-pro-475/100/ 

Title: Re: Anyone know where to get gasket sets/seals for Jonsered?
Post by: wild262 on March 21, 2016, 03:53:34 pm

I have a 2094 that I need a case gasket for as well.