Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Poulan => Topic started by: deezlfan on March 29, 2016, 07:46:42 pm

Title: Bar ID ?
Post by: deezlfan on March 29, 2016, 07:46:42 pm
I have a bar I suspect is for a Poulan. Only markings are 530-044338 followed by 1850 8879 GF Made in Canada.

18" long and has a replaceable .325 roller nose held on with one rivet. Appears to be .050. Oils through the studs.

Can any one confirm what it might have been mounted on?
Title: Re: Bar ID ?
Post by: 3000 FPS on March 29, 2016, 10:10:45 pm
A picture of the mounting area of the bar may help.   It could fit more than one model and make of saw out there.
Title: Re: Bar ID ?
Post by: 660magnum on March 29, 2016, 10:36:14 pm
Most Poulans are a variation of the Oregon 041 mount A K & T  with a 8.2mm slot

(http://www.oregonchain.com.au/images/a041-kO41.jpg)
Title: Re: Bar ID ?
Post by: 660magnum on March 29, 2016, 10:44:25 pm
(http://mikeschainsawshop.co.nz/wp-content/uploads/2015/06/ResizedImage464600-Cannon-Super-Bar-Mount-Guide.jpg)
Title: Re: Bar ID ?
Post by: 660magnum on March 29, 2016, 10:47:07 pm
(http://g01.s.alicdn.com/kf/HTB19MfqFVXXXXcDXFXXq6xXFXXXo/221389978/HTB19MfqFVXXXXcDXFXXq6xXFXXXo.jpg)
Title: Re: Bar ID ?
Post by: deezlfan on March 30, 2016, 06:41:41 am
Looks like the K041 profile.
Title: Re: Bar ID ?
Post by: Cut4fun . on March 30, 2016, 12:57:40 pm
I have a bar I suspect is for a Poulan. Only markings are 530-044338 followed by 1850 8879 GF Made in Canada.

18" long and has a replaceable .325 roller nose held on with one rivet. Appears to be .050. Oils through the studs.

Can any one confirm what it might have been mounted on?

WAG Probably came on a 3000 2700 2800 285 305 335 3300 being .325. 
Title: Re: Bar ID ?
Post by: deezlfan on March 30, 2016, 02:32:13 pm
Thanks Guys. Just couldn't get a match on the part number.