Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Chainsaws not listed - Gas OPE => Topic started by: dannyupsolate on April 11, 2016, 12:47:29 pm

Title: husqvarna 323c weedeater
Post by: dannyupsolate on April 11, 2016, 12:47:29 pm

Just dug into this one got flywheel off. Much better quality than the cheapo's I been working on. It did say Sweden on tag.Now to rob flywheel off another one. Key was cast into flywheel and gone.

Title: Re: husqvarna 323c weedeater
Post by: Cut4fun . on April 11, 2016, 03:09:51 pm

I have a 322L.  Is the 323C a newer version of it?

https://youtu.be/LVz2ww2UDfE

Title: Re: husqvarna 323c weedeater
Post by: dannyupsolate on April 11, 2016, 04:25:14 pm

may be older . I will try to rob flywheel from a 323L may take it's straight shaft while I am at it. 323C had curved shaft. A customers 323L and my parts 323L have straight shaft with different looking bump heads.  The 323c had curved shaft with insert strings no wind up spool. All the motors look just alike. It's my first husqvarna trimmer to work on so I know nothing.

Title: Re: husqvarna 323c weedeater
Post by: dannyupsolate on April 11, 2016, 05:43:49 pm

323L and 323c flywheel are same part number.

Title: Re: husqvarna 323c weedeater
Post by: dannyupsolate on April 12, 2016, 06:30:34 pm

great running machine. called for zama gnd 39 kit gnd 35 worked fine. not pinching gas cable when reassembling trigger housing hardest part of job.