Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Poulan => Topic started by: AmericanPsycho on May 23, 2016, 05:54:12 pm

Title: Boss is going to have me look at his 3314
Post by: AmericanPsycho on May 23, 2016, 05:54:12 pm
My boss told me his 3314 starts and idles fine but dies as soon as he gives it gas. I'm thinking the H screw needs to be turned out or the carb possibly needs rebuilt.
Title: Re: Boss is going to have me look at his 3314
Post by: Cut4fun . on May 23, 2016, 06:08:50 pm
My boss told me his 3314 starts and idles fine but dies as soon as he gives it gas. I'm thinking the H screw needs to be turned out or the carb possibly needs rebuilt.

L side opened up IMO
Title: Re: Boss is going to have me look at his 3314
Post by: AmericanPsycho on May 23, 2016, 06:14:12 pm
Boy was I wrong. Thanks.
Title: Re: Boss is going to have me look at his 3314
Post by: leec on June 11, 2016, 06:43:42 pm
Not bad little saws, but I find they want to bit my finger when starting.  I know WUSS!
Title: Re: Boss is going to have me look at his 3314
Post by: MuddSaw on June 24, 2016, 12:31:36 pm
Poulan saws are awesome!
Inexpensive and easy to work on. Maintained and serviced regularly there as good as anything out there.
 These saws are not intended to be used for commercial logging or cutting. Although many are used for that purpose. Properly mixed fuel, clean carb, and good gas lines, they will last a long time.

Sent from my XT1254 using Tapatalk