Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Efco Olympyk Oleo-Mac => Topic started by: Cut4fun . on July 26, 2016, 06:59:43 pm
-
Is the efco 8200 MT 8200 mt8200 a updated or same 980? http://www.efcopower.com/products/chainsaws/mt-8200
Seeing them new for $599. Are they NOS like the solo 665 for sale still or are they still making them?
efco 8200 IPL http://www.efcopower.com/sites/default/files/MT8200_IPL.pdf
manual http://www.efcopower.com/sites/default/files/MT7200-8200_OM_B_rev1_0.pdf
Specifications:
Displacement 80.7 cc
Power 6.0 HP
Bar Length 20", 24", 28"
Chain (pitch x gauge) 3/8" x .050" or .058"
Oil Pump Automatic, Adjustable
Oil/Fuel Tank Capacity 14.9/29.8 fl. oz.
Weight 15.6 lb.
Max RPM 12,500
(http://img0036.psstatic.com/130861799_efco-mt-8200-arborist-chainsaw-24-in-80cc-new-with-.jpg)
-
As far as I can remember it is the newest version of the 980. Different ports, coil, carb and air intake. I have the MT7200 and 980. Every exterior piece will interchange. Stroke is different between 70 and 80 cc saws. Good price on the saw. Of all the Efco saws I have or had the 980 7200 are the toughest by far.
-
piston cylinder 50102012D says Fits Efco 181 981 MT-8200
52mm bore so must have same stroke of the solo 681 ?
IPL http://www.efcopower.com/sites/default/files/MT8200_IPL.pdf
(https://cdn.shopify.com/s/files/1/0032/0472/products/mt8200_002_1024x1024.JPG?v=1418419263)
-
Same bore and stroke of 181/281. Far as I know still produced
Sent from my SM-G930V using Tapatalk
-
solo 38mm stroke 665-681
dolmar makita 37mm stroke 6400-7900
husky 36mm stroke 362-375
poulan 36mm stroke 415-505
husky 38mm stroke 181-288
So that should put the 8200 52mm bore and 38mm stroke. ;D
-
Stock 8200 and first cuts.
Remember this guy from back in 2008-2011. Video 2010
https://youtu.be/HWQsggs_0eY
-
Looks like same wood above tested these too. Is what it is.
makita had a 8T on it and rest of saws had 7T
https://www.youtube.com/watch?v=IbKogw8DPSM
https://www.youtube.com/watch?v=v9UP6uUxuDY
https://www.youtube.com/watch?v=Xc9oSqKEwRQ
https://www.youtube.com/watch?v=6nfaaPjOiK4
-
Word I got on the 8200's they aren't making them anymore but they have a warehouse full of them stateside.
-
Word I got on the 8200's they aren't making them anymore but they have a warehouse full of them stateside.
I was checking for local dealers, not much info on their online sites. Mt Gilead and Marion.
I want to know about parts availability too.
Thats why I never touched the nos solo 665's that have been for sale for $500.
-
Looking for specs on the walbro wj121 carb.
All my links from past no longer working for walbro info.
(https://cdn.shopify.com/s/files/1/0032/0472/products/mt7200_016_1024x1024.jpg?v=1379022019)
(https://cdn.shopify.com/s/files/1/0032/0472/products/efco7200_016_1024x1024.JPG?v=1398455276)
-
Member here scarr
Ported John Deere CS81 Chainsaw Efco 181 Olympyk 981 Ported with finger and feeder ports. 20" bar 8 pin
https://youtu.be/hctqR5ScrDg
-
Whats the difference in the Efco 181 and the 8200 ?
-
Plastics and bar studs. 181 uses D025 mt. 8200 D009. Only difference I know of I have both.
Shep
-
I watched a video of a local guy cutting with a poulan pro 445 71cc and it was out cutting the efco 8200 stock for stock easily.