Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Homelite => Topic started by: James Vassil on August 17, 2016, 04:21:39 pm
-
UT10734R (14")
This saw was unused for several years. I filled it with a fresh mix of 32/1 (that was marked on the saw by a sharpie), cleaned and re-gapped the plug. I also put a new chain on it. It starts and runs and cuts fine but I have to keep the throttle up or it dies. I've adjusted the idle screw with no results. There are 2 other adjustment screws and I have not touched them. Someone told me they were probably the lo and hi adjustments. I don't have a shop manual so I don't know the reference points to adjust them.
Thanks in advance for any help on this and hagd.
Jim
-
UT-10734-R CS3314 IPL https://www.partstree.com/parts/homelite/saws-chainsaw/cs3314-ut-10734-r-homelite-chainsaw/
L closest to engine, H furthest away.
Try opening your L up counterclockwise. If that dont help it may be your carb diaphragms have gotten stiff.