Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Stihl => Topic started by: Legeance on August 30, 2016, 08:06:29 pm
-
You know the tag rivets that hold the tags onto the recoil and stuff. It has like a rounded head. How can I get those out and how can I like reattach the tag using those same rivets? I've got an S10 with the real old Stihl sign and want to restore the thing but I have no idea how to get the tags off.
-
I used new rivets that you could still buy new from stihl. Never tried reusing them.
-
Just remembered this thread. This guy maybe knows. http://chainsawrepair.createaforum.com/stihl/metal-tag-reconditioning/
-
I don't plan on reusing them and where can I get them from stihl?
-
I don't plan on reusing them and where can I get them from stihl?
order at dealers. Thats how I did it. If not NLA now.
http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/4cf3ef0f6a332ae488256ba2001858d9?OpenDocument
Check see if yours is the same as the 08S I gave away.
0000 974 1000 00009741000 round rivet head 3x6 recoil cover Also some on FEEbay. $1.29 - $2
9441 065 1270 94410651270 round rivet head 2.6x6 side plate cover
-
The 0000 974 1000 tag rivets are still available threw stihl. Just ordered some for the recoil badge on my 084.
-
Off subject
I have a bag full of those stihl cover metal grommets left over. Never heard any call for those.
Sure know one tore the heck out of a poly flywheel turning 15K. Thinking that was what it was, memory fuzzy on that right now.
Never needed any since.