Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Husqvarna => Topic started by: farmboy on December 24, 2016, 08:39:36 pm
-
Does anybody know what assembly tool 502-5030-13 is for? Jacks shows it a good PN but doesn't say what it fits. I Googled it no help. I couldn't find it in any of my Service Tool lists. The PN 502- 5030 says crankshaft assembly tool to me.
Shep
-
Still looking for info.
$58 new
(https://cdnqs4p.quicksearch4.com/i/aDovL2EvMDAvcy9OelV3V0RFd01EQT0veii9ipRlFBQU9Td291ZFc2bnZNLyRfMTIuSlBHP3NldF9pZD04ODAwMDA1MDBG.jpg?set_id=880000500f)
-
Tor on opeforum had a list in a thread a short time back what series saws they fit. I've been meaning to get some myself for the 372 and 385
-
Tor on opeforum had a list in a thread a short time back what series saws they fit. I've been meaning to get some myself for the 372 and 385
Found it but not seeing this above listed.
Overview over different crank threads (F=flywheel side, PTO=clutch side) (links=counterclockwise threaded):
Husky:
133/234/238/242/246/42:
F: M8
PTO: 3/8" links
240/340/40/44/444:
F: M8
PTO: M10 links
50/51/55:
F: M8×1
PTO: M10 links
254/257/262:
F: M8×1
PTO: M10 links
346/353:
F: M8×1
PTO: M10×1 links
357/359:
F: M8×1
PTO: M10 links
545/550/555/560/562:
F: M8x1
PTO: M10 links
Huskies # numbers for models:
# 502 50 30 01, 2100
# 502 50 30 04, 61/66/162/266/268/272
# 502 50 30 06, 44/444
# 502 50 30 07, 133/234/238/42/242/246
# 502 50 30 08, 281/288 (394/3120/181/2101)
# 502 50 30 09, 40/45/51/55
# 502 50 30 10, 154/254/257/262
# 502 50 30 15, 362/365/371/372
# 502 50 30 16, 357/359
# 502 50 30 17, 385/390
# 502 50 30 18, 346/351/353
# 502 50 30 19, 343R,F/345RX,FX,FXT/355
# 502 50 30 20, 570/575
# 502 50 30 23, 545/550/555/560/562
-
Everything I had found last night showed listed partner jonsered etc. 502503013
-
Search in husky parts shows this. Nothing on what models.
Husqvarna 502503013, 502 50 30-13
Mfg: Husqvarna Original Parts
Description: FITTING TOOL
Discontinued, No Longer Available in US but can still be bought abroad.
-
The only thing I found was Partner. Would like to find out may be adaptable to use on NLA like 272, 2100.
Shep
-
Maybe spike or weimedog knows what it fits.
-
2077 / partner crankshaft tool
-
2077 / partner crankshaft tool
Cool didnt even know they had one. That would explain it coming back to partner and jonsered.
-
Tor on opeforum had a list in a thread a short time back what series saws they fit. I've been meaning to get some myself for the 372 and 385
502 50 30-15 is the 372 tool
-
Tor on opeforum had a list in a thread a short time back what series saws they fit. I've been meaning to get some myself for the 372 and 385
502 50 30-15 is the 372 tool
How much is that one?
-
Little less than $50.00 @Jacks.
Shep
-
Thanks
-
Fisaw nailed it
CRANKCASE/CRANKSHAFT
CRANK SHAFT INSTALLATION
TOOL
Model: 2077
Order no. 502 50 30-13
*!3J1I8D-afcebj!
Page 14 or so
http://www.jonsered.com/ddoc/JONI/JONI2000_AAaa/JONI2000_AAaa_I0000056_.pdf
-
Wonder why the difference in the 2077 tool 502 50 30-13 and the 2083 tool 502 50 30-14 . The pto bearing is different, maybe reason?
jonsered service tools http://www.jonsered.com/ddoc/JONI/JONI2000_AAaa/JONI2000_AAaa_I0000056_.pdf