Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => McCulloch => Topic started by: Cut4fun . on January 07, 2017, 09:58:32 am
-
Just in case some of you McCulloch collectors might want a set. I know a guy that has 3 sets of Vintage Mac NOS cut length chain charts.
NOS Mac self adhesive chain charts.... Have 3 sets total, 2 have never been out of original packaging.... 1 only removed to take these pics.
chains .250 .325 .354 .375 .375 mini mac .404 .500 .562
3 pics
-
I would bet you already have many of these but just in case you dont @heimannm
-
Seeing that reminded me I have .354 20" 73dl chains. Also have a few .354 rim sprockets. Was going to try this on one my 3500's w/hardnose bar. Long story on how I wound up with this chain. Was told it would work on .325 rim IDN but I have my doubts.
Shep
-
I'm buying all 3. I might keep one for myself. Since I never found the one I got in a box ( woodland pro one ) in the barn now for last few years.
So still counting the freaking chain links to break. :-[
Members of this site have first crack and Aaron already stated he wanted one.
-
I'd be in for one.
Shep
-
I have one mounted to a suitable board but just use it for display, I have one from Baileys that I actually use in the shop for counting links.
.354 will not work on .325 or.375 sprockets, it will only work with .354 sprockets. I even found 2 or 3 nose sprockets in .354.
Mark
-
Looking forward to mounting this up on a board for display and use.
-
Shipped to me today. He said shipping was $7 and had to be rolled up. Said to put them out flat in warm area once we get them where they need be and let set to flatten back out.
Once arrived I will divide up and repackage to get shipped out. Once shipped I will let you know your totals for PP by friends please.
or do you want me to get a rough estimate for you before shipping?
-
Whatever works best for you.
Shep
-
For you 2 I have no problem mailing first to come up with actual cost of shipping.
-
That works for me Kevin.
-
Box is in hand. Will open when got time over weekend. If not next week.
-
I was getting ready to use the one I got for myself today. But I couldnt bring myself to do it for using and stick down on board. If a collector wants it let me know. A member here has 1st dibs before offering it elsewhere.
It is the 3rd one of the 3 and is shown in pics shown above.
-
3rd one spoke for.
-
I was able to find 3 boxes small enough to wound them in. This kept the shipping weight down to go 1st class. Have tracking if it is needed.
CA and NC show Sat, but I wouldnt bet on that. PA shows Fri.
I will figure each with totals little later and PM them to you.
Enjoy,
Kevin
-
Thanks Kevin. Money sent.
-
Thank you much! money sent.
Shep
-
I havent checked the tracking on them. Anyone get them?
-
Received mine! Many thanks Kevin.
-
Let's see some photos of that mounted Aaron. I will try to remember and get some photos of mine as well amid the McClutter in my shop.
Mark
-
Mine came in Saturday. Thanks Kevin!!!!
Shep
-
TTT for guy looking for pics of this.
-
Looking for high resolution photos of the McCulloch cut-length saw chain bench scale so they can be converted to a pdf.
-
Looking for high resolution photos of the McCulloch cut-length saw chain bench scale so they can be converted to a pdf.
I sold them all to folks here. @farmboy should have one.
-
by chance, are these still available?
-
by chance, are these still available?
No sir all in collectors hands now.