Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Stihl => Topic started by: Tripleteer on January 13, 2017, 04:04:49 pm

Title: Stihl 041AV
Post by: Tripleteer on January 13, 2017, 04:04:49 pm

Hi all, first post question.
   I am in the process of reinstalling the oil pump on the above saw,
On the end of the pump shaft at the worm gear end there is a bevel, I need to know if this bevel has to be in a certain position before I push the pump home. All replies will be much appreciated, Paul.

Title: Re: Stihl 041AV
Post by: fossil on January 13, 2017, 09:38:09 pm

I don't believe so. Here's a copy of the service manual. It's not great but it will give you what you need.

https://app.box.com/s/7fpi57fxl3ybh1vr76pv685b51f26wk9

Title: Re: Stihl 041AV
Post by: Tripleteer on January 14, 2017, 06:00:47 am

Quote from: fossil on January 13, 2017, 09:38:09 pm

I don't believe so. Here's a copy of the service manual. It's not great but it will give you what you need.

https://app.box.com/s/7fpi57fxl3ybh1vr76pv685b51f26wk9

Thanks Tim, I think I know where I'm going with the pump now,
       Regards Paul.