Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Partner => Topic started by: Cut4fun . on January 02, 2012, 02:23:16 pm

Title: Partner 710
Post by: Cut4fun . on January 02, 2012, 02:23:16 pm


(http://i59.photobucket.com/albums/g289/doemaster789/PP505PP365JD800/p710.jpg)
Title: Re: Partner 710
Post by: chainsman1 on February 12, 2012, 11:04:15 pm
Look like a jonsered 2177
Title: Re: Partner 710
Post by: Cut4fun . on February 13, 2012, 01:23:09 pm
Thats what I thought too partner 7700 = jred 2077, except 710 is a the 71cc version like the poulan 445.
Title: Re: Partner 710
Post by: Modifiedmark on February 19, 2012, 11:22:10 am

Nice Kevin, is that one yours?

That 710 is harder to find then the 7700 and I think there was a 65cc something version as well.
Title: Re: Partner 710
Post by: Cut4fun . on February 19, 2012, 11:48:01 am
No Mark not mine, it is in Sweden and belongs to Magnus. I've never seen one here only a PP445 so far.
Title: Re: Partner 710
Post by: Cut4fun . on February 19, 2012, 11:53:39 am
The only 65cc one I have seen belongs to Belgian. Partner 660

(http://i59.photobucket.com/albums/g289/doemaster789/415/660c.jpg)
Title: Re: Partner 710
Post by: Modifiedmark on February 19, 2012, 10:06:18 pm
Thats the one I was thinking of and its sweet!
Title: Re: Partner 710
Post by: Al Smith on February 21, 2012, 10:38:38 am
Partner in this area is just like J-Red or Sachs-Dolmar .They never had any stocking dealers so they are just a rare sight .Poulan is the same way .Nobody  carried much other than small saws ,the larger pro models are all but non existant .
Title: Re: Partner 710
Post by: SawTroll on April 27, 2012, 10:48:06 am
Quote from: Cut4fun2 on February 13, 2012, 01:23:09 pm
Thats what I thought too partner 7700 = jred 2077, except 710 is a the 71cc version like the poulan 445.

Quote from: chainsman1 on February 12, 2012, 11:04:15 pm
Look like a jonsered 2177

Surely, this saw family is all based in the Partner P7700. There was no husky version, but at least most of the saws were actually made at the Husky factory in Sweden.

65cc: P660, PP415/425.

71cc: P710 and PP445.

77cc: P7700, 2077, 2083 II and PP475.

82cc: 2083 and PP505.

Early saws did not have the fully developed "Air Injection" (different names between the brands), and had a pre-filter. Later saws had the fully developed "Air Injection".