Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Poulan => Topic started by: rls8836 on March 11, 2017, 08:46:16 pm
-
This saw runs and cranks well but the chain oiler leaks a lot of oil when setting and when running. How can I adjust this to less oiling?
-
Non adjustable if I remember right. Check your oiler line connections underneath the bar plate.
Also when you get done running the saw open your oil cap and then put back on.
Rather have one oiling goooood then a stingy oiler like some.
-
poulan 4018 IPL http://www.poulan.com/ddoc/POUI/POUI2008_USen/POUI2008_USen__530165407.pdf
2 little boxes show the oiler connection on right side page 1
-
Cut4fun I see what you are referring to, what do I do with that. Is there any adj. I don't see any.
-
Cut4fun you stated you didn't think there was any adjustment. I guess I need to look at the oiler line and make sure it is not c-racked or split and is pushed on all the way. What does taking the oil cap off and reinstalling it do. Relieve oil pressure in oil tank?
-
Yep no adjustment.
Yep relieve any pressure if that.