Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Husqvarna => Topic started by: raumato01 on March 31, 2017, 05:55:52 am

Title: Pressure test husqvarna 288
Post by: raumato01 on March 31, 2017, 05:55:52 am

I've got a 288 and 181 I want to make sure have no air leaks and was wondering what best method is for pressure testing the crankcase? I'm used to stihls where you can run it into the impulse but these are a bit different.

Title: Re: Pressure test husqvarna 288
Post by: fossil on March 31, 2017, 12:17:09 pm

Pressure and vacuum through the spark plug hole. Some knock the center out of a plug and epoxy an air fitting in or Husky makes an adapter.