Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Poulan => Topic started by: Cut4fun . on July 17, 2017, 04:13:07 pm

Title: Poulan 400
Post by: Cut4fun . on July 17, 2017, 04:13:07 pm
Guy on the chainsaw repair group wanting to know about the poulan 400. Pics below.

Title: Re: Poulan 400
Post by: Cut4fun . on July 17, 2017, 04:15:34 pm
400 http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/b5cf1afdcf21f31488256b35001d7d4f?OpenDocument

400A http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/c8b146478043fc6188256b35001db551?OpenDocument
Title: Re: Poulan 400
Post by: old 040 on June 12, 2018, 04:53:00 am
Bumping an old thread, that 400 looks to be in pretty nice condition, I picked one up but will need a complete rebuild, it has very loose crank bearings, it will run as is, but I'm worried that the crank seals won't hold up with the loose bearings, and I don't want to burn up the top end....I did find a 401 that best I can tell is a low hour saw and runs very well, it too has the power sharp, but it's missing the sharpen stone/lever assy.