Chainsaw Repair

Chain - Grinders - Filing - Wood Milling - Tools - Welding - Machinist - Mowers - Tillers => Mowers Tillers Tractors etc => Topic started by: jmester on September 23, 2017, 09:37:15 am

Title: Troy bilt tiller wheel shaft size
Post by: jmester on September 23, 2017, 09:37:15 am
I have a Troy Bilt junior tiller that I need a new tire for the tire size is 3.25/5. Threw my internet searchs I have not had any luck in finding them. Thinking of just getting some wheels from a pony or horse tiller if the wheel shaft is the same size, as those rims and tires are readily available. The shaft size on my junior is 1" that is measured with a tape on the end of the shaft.
Title: Re: Troy bilt tiller wheel shaft size
Post by: jmester on September 23, 2017, 09:40:54 am
(https://uploads.tapatalk-cdn.com/20170923/87e46114010296e8ad838657f47f1852.jpg)


Sent from my iPad using Tapatalk
Title: Re: Troy bilt tiller wheel shaft size
Post by: Cut4fun . on September 23, 2017, 10:33:56 am
@Nathaniel Vansickle  maybe?
Title: Re: Troy bilt tiller wheel shaft size
Post by: Cut4fun . on September 23, 2017, 10:41:23 am
This place has a 3.25 5 lug tire in selection http://www.georgeswholesaletires.com/greenball-jr-lug-tire-detail.htm?productid=5643488

Also can you just put a tube inside your old tire?  Done that alot.
Title: Re: Troy bilt tiller wheel shaft size
Post by: Nathaniel Vansickle on September 23, 2017, 11:21:53 am
I couldn't come up with anything. looks like that place is worth a phone call and a bookmark on my end for future reference
Title: Re: Troy bilt tiller wheel shaft size
Post by: jmester on September 23, 2017, 11:38:43 am
I called them they didn't have it. And even if they did they don't ship. Well I guess I will have to keep looking. Thanks
Title: Re: Troy bilt tiller wheel shaft size
Post by: jmester on September 23, 2017, 11:50:28 am
I am going to just try to put a tube it. If that don't work then figure it out at that point.
Title: Re: Troy bilt tiller wheel shaft size
Post by: Cut4fun . on September 23, 2017, 12:04:22 pm
I tried.  I'll look again in free time.
 
Title: Re: Troy bilt tiller wheel shaft size
Post by: Cut4fun . on September 23, 2017, 12:04:50 pm
I am going to just try to put a tube it. If that don't work then figure it out at that point.

I have good luck with this. Tube has never failed me yet.