Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Poulan => Topic started by: Cut4fun . on October 06, 2017, 11:00:35 am
-
Havent seen the JCPenney chainsaw labeled one before. Saving pics
-
Havent seen the JCPenney chainsaw labeled one before. Saving pics
Me neither. Nice find.
-
Havent seen the JCPenney chainsaw labeled one before. Saving pics
Me neither. Nice find.
FS in Ohio for $50 and says runs ready to go. But I wont be driving toward it.
-
That's a variation of an s-25 .I have no doubt the secondary sellers sold more of them than Poulan itself .
-
Sweet.
I have an S25 Counter Vibe and love it.
Would love it more, if it had auto chain oiler, but it was free.
-
Sweet.
I have an S25 Counter Vibe and love it.
Would love it more, if it had auto chain oiler, but it was free.
Dont know where you at for shipping. But I have a wizard S25 CVA project and a 25 runner that just needs a muffler cover. Cheap or trade.
orange top and yellow of the 3 in pic.
(https://chainsawrepair.createaforum.com/index.php?action=dlattach;topic=6125.0;attach=19686;image)
(https://chainsawrepair.createaforum.com/index.php?action=dlattach;topic=6125.0;attach=19689;image)
(https://chainsawrepair.createaforum.com/index.php?action=dlattach;topic=6125.0;attach=19179;image)
-
Sweet.
I have an S25 Counter Vibe and love it.
Would love it more, if it had auto chain oiler, but it was free.
Dont know where you at for shipping. But I have a wizard S25 CVA project and a 25 runner that just needs a muffler cover. Cheap or trade.
orange top and yellow of the 3 in pic.
Me likey.
I'm in Metro Atlanta GA.
Sooooooooooo, how cheap?
How much for each/both?
I'm quite fond of the S25, since receiving the one I have.
What does the Wizard need? I couldn't quite make out the compression reading.
Do the S25s respond well to muffler mods?
Or, port work, for that matter?
Or is it better to just leave them stock?
-
There is no "muffler mod" .It's a baffled muffler,you just leave the baffle plate out .Little rascals can get kind of loud .I don't remember if they have one or two plates .
The real early models just had a stub spark arrestor then later came an aluminum muffler followed by sheet metal mufflers . I have models with all three .
-
Orange wizard cva 38cc needs fuel line and carb kit I would guess. Has 140psi in that pic and spark. I never checked it with my gauge.
Yellow 34cc runs but will need the hardened fuel line replaces and the outside muffler cover.
The saws are great stock in cuts. IMO no modding needed when their right.
I figure $40 for the pair is as low as I will go. I can sell a part off the cva and get most of that. But I dont want to do that to a complete saw.
-
Shipping est from UPS sent for both saws PHO