Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Husqvarna => Topic started by: Vikmata on October 30, 2017, 10:56:39 am

Title: Husqvarna k760 speed problen
Post by: Vikmata on October 30, 2017, 10:56:39 am
I have replaces the piston and sparplug but stays the same until time goes by then it warms up and cuts fine but if i run out of gas by the time i start it again is the same thing. 

Can it be a clutch problem?
Title: Re: Husqvarna k760 speed problen
Post by: Cut4fun . on October 30, 2017, 04:24:31 pm
@3000 FPS has messed with these.
Title: Re: Husqvarna k760 speed problen
Post by: 3000 FPS on October 30, 2017, 06:53:53 pm
I would check the belt on it to make sure it is in good shape and has the correct tension.   Then I would check the clutch to make sure it is in good shape.   

If the engine is running ok but the blade has stopped spinning when cutting into concrete or pavers then it is not the carb.