Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Chainsaws not listed - Gas OPE => Topic started by: super44 on November 02, 2017, 06:48:16 pm

Title: Remington PL-4 oiling issue
Post by: super44 on November 02, 2017, 06:48:16 pm

Paid 10.00 for thing and it runs OK, problem is oiling.  Duckbill was a pile of black goo so I pealed it out and put in a new duckbill but it still will not pump oil.  Even with oil in the tank the manual oiler will not pump oil to the bar. The line is clear from the manual pump to the bar but before that I would need to tear it down to check the lines.  I'm not 100% sure the duckbill is the correct one but it is very close.  Any thoughts on do I need to tear it down?

Thanks

Title: Re: Remington PL-4 oiling issue
Post by: super44 on November 06, 2017, 02:04:44 pm

Does the duckbill face the oil tank?

Title: Re: Remington PL-4 oiling issue
Post by: Cut4fun . on November 06, 2017, 03:33:59 pm

Remington pl-4 ipl http://s30387.gridserver.com/partsDiagrams/Remington%20PL-4.pdf

no help from me. maybe see something in ipl

Title: Re: Remington PL-4 oiling issue
Post by: super44 on November 08, 2017, 11:05:17 pm

Thanks for the reply.  I put the pieces in a box on a shelf for now.