Chainsaw Repair
Chain - Grinders - Filing - Wood Milling - Tools - Welding - Machinist - Mowers - Tillers => Chain - Bars - Grinders - Filing => Topic started by: Cut4fun . on November 14, 2017, 10:21:43 am
-
Dolmar labeled chain on the sachs 116si was 3/8 thinking 050 64dl. Had dolmar on chassis and 102 on drive links. Try to figure out the maker. Guessing oregon or carlton. Reminded me of the safety oregon SL ramps.
Bar was 64 DL measured 17" from case out to tip - laminated bar with sach dolmar on it. Looked like a as sold set up when new.
Sorry no close pics as shipped already.
-
Couldn't find Dolmar 102 chain. Put in a request to Dolmar. This chart has some Dolmar numbers but no 102.
[attachimg=1]
-
Thanks for trying. Will try and get pic from new owner.
-
Contacted Dolmar about the Dolmar chain with 102 stamped on the chain.
"The 102 Dolmar chain is made for us by Oregon Saw Chain and their current equivalent chain is their 72V. This chain is 3/8 pitch and .050 gauge. "
Asked about some kind of cross reference chart to their chain but no luck.
-
Thanks for the extra mile of searching you did. :o 8)
The chain looked like the ole oregon super guard stuff.
Like this with dolmar on strap and 102 on dl
-
So much for contacting Dolmar. That sure isn't Oregon 72v chain. Couldn't even find chain info on Dolmar's website.
-
So much for contacting Dolmar. That sure isn't Oregon 72v chain. Couldn't even find chain info on Dolmar's website.
You said equivalent to the 72v now. So they might have been right. The ole SG was prob considered like the V today.
-
It all depends what makita use !!!