Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Partner => Topic started by: Old Iron Logging on January 16, 2012, 03:47:21 pm

Title: Partner 5000 Circular saw.
Post by: Old Iron Logging on January 16, 2012, 03:47:21 pm

Building a circ saw out of a 5000 partner. Have the blade on now.
(http://i1153.photobucket.com/albums/p513/OILWOODCUTTER/IMG_3446.jpg)

Title: Re: Partner 5000 Circular saw.
Post by: w8ye on January 16, 2012, 03:55:33 pm

The blade is on backwards?

Title: Re: Partner 5000 Circular saw.
Post by: Old Iron Logging on January 16, 2012, 04:03:25 pm

Yes, if it was on an electric circ.

I would have to run the chainsaw backward if I turn it around. This is the only way it will work on a chainsaw.

Title: Re: Partner 5000 Circular saw.
Post by: w8ye on January 16, 2012, 05:00:30 pm

After thinking about it, I see what you mean.

I guess you will have to pull with it?

Title: Re: Partner 5000 Circular saw.
Post by: Old Iron Logging on January 16, 2012, 05:14:00 pm

Going to be mounted solid on my chainsaw mill carriage making it an edger. ;)

Title: Re: Partner 5000 Circular saw.
Post by: w8ye on January 16, 2012, 05:15:22 pm

It should work well

Title: Re: Partner 5000 Circular saw.
Post by: Old Iron Logging on January 16, 2012, 05:22:17 pm

Time to confess, I am just making a degree wheel to check the #'s on the 5000.

Title: Re: Partner 5000 Circular saw.
Post by: Cut4fun . on January 16, 2012, 06:05:07 pm

 :D

I have seen a 500 or 5000 concrete saw in the past.

Title: Re: Partner 5000 Circular saw.
Post by: woodplayer on January 16, 2012, 08:07:09 pm

I think most saw blades aren't recommended to rotate more than 7000rpm.

Just wondering how fast you you might be planning on turning that one? ;)

Title: Re: Partner 5000 Circular saw.
Post by: Cut4fun on January 17, 2012, 03:06:40 pm

Art will you do me a favor and see if the worm gear on the 242 246 254 is the same worm gear on the partner 5000+.

I found the oem husqvarna worm gear remover for $16 and shipping for the 242 246 254 etc. So just wondering if it might work on the 5000 worm gear too.

says fits
51
55
42
242
246
254
257
262

Title: Re: Partner 5000 Circular saw.
Post by: Old Iron Logging on January 17, 2012, 03:10:34 pm

Are we talking the brass oil gear? The newer Huskys ran plastic gear once they went to the no oil at idle setup.

Title: Re: Partner 5000 Circular saw.
Post by: Cut4fun . on January 17, 2012, 04:17:35 pm

Yes the metal gear that is pressed on the crank.