Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Echo => Topic started by: DB_43725 on January 20, 2012, 02:54:34 pm

Title: Echo cs360T
Post by: DB_43725 on January 20, 2012, 02:54:34 pm
Does anyone make any different drive sprockets for this saw ?
Title: Re: Echo cs360T
Post by: Cut4fun . on January 20, 2012, 06:19:36 pm
I dont know this saw so I am looking into echo info. Echo nut username here is the echo go to guy.

This?   http://www.echo-usa.com/Products/Chain-Saws/CS-360T

6 IPL's depending on serial numbers.  http://www.echo-usa.com/Support-Help/Technical-Documents.aspx?s=CS-360T

I'm just going to pick one to see info.  First one shows a spur gear type clutch drum.  http://www.echo-usa.com/getattachment/07fbfc21-c570-4a7a-960b-ee38118437c5/CS360Te_09_010411.pdf

Title: Re: Echo cs360T
Post by: Cut4fun on January 20, 2012, 07:06:52 pm
Onlu thing I see for the 360T is 3/8LP spur drums offered. Here is one $15 shipped.  http://www.ebay.com/itm/Echo-Spur-3-8lp-Sprocket-2800-354M6-CS301-302-315-351-360-3-8-LP-/110752002290?pt=LH_DefaultDomain_0&hash=item19c95570f2
Title: Re: Echo cs360T
Post by: DB_43725 on January 21, 2012, 01:48:03 pm
Thanks for all the help,,, What im looking for is a sproket that will fit it thats a 325 pitch,, I know now that echo doesnt make such an aminal,, but was hopeing some other manufacturer might be able to make it work. I picked up a realy nice bar for this saw and I would realy like to use it,,, but not paying close atention till I got it , seen its a 325 pitch instead of 3/8 low pro. So I set out and try to find something I might beable fit in their. Good thing is that listing on e bay shows it also fits another brand of saw, so maybe with any luck maybe that CO make one. This may be all for not anyway as the dern thing may not want to pull a larger chain,,LOL But I wont know unless I try. I was kinda thinking that when ever they bring out a new model they may use some parts the tooling has already been make to produce, or buy someones old tooling, Maybe Im wrong, but seems that might be cost effitive. I did find out Johnsonred makes a small sproket in 325 but I dont know about Dia and shaft size. Sorry for being so long winded here,but I was just looking for someone that might have a little intel.
Title: Re: Echo cs360T
Post by: Cut4fun . on January 21, 2012, 02:23:24 pm
Start by looking at echos with replaceable rims that will match up to your clutch drum.

echo clutch drums  http://www.ebay.com/sch/i.html?_nkw=echo+clutch+drum&_sacat=11700&_odkw=echo+325+drum&_osacat=11700&_trksid=p3286.c0.m270.l1313

http://www.ebay.com/sch/i.html?_nkw=echo+325&_sacat=11700&_odkw=echo+325&_osacat=0&_trksid=p3286.c0.m270.l1313

Title: Re: Echo cs360T
Post by: mountainlake on January 26, 2012, 07:21:47 pm

 You'll find you cutting speed a lot slower with a .325 7 tooth setup.  Tried it both ways.   Steve