Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Husqvarna => Topic started by: joel4bs on March 29, 2018, 05:50:07 pm

Title: husky 570 starts but bogs bad
Post by: joel4bs on March 29, 2018, 05:50:07 pm
carb  gaskets replaced ..saw starts well...idles well...but bogs bad when triggers is pulled...I am about ready to bring it for repair, but would be glad to do the work myself if anyone here has a good plan...saw was running great ...strong etc not long ago.
Title: Re: husky 570 starts but bogs bad
Post by: Cut4fun . on March 29, 2018, 07:47:06 pm
Open L up on carb.
Title: Re: husky 570 starts but bogs bad
Post by: joel4bs on March 29, 2018, 08:26:08 pm
I will try that again, Thanks
Title: Re: husky 570 starts but bogs bad
Post by: Cut4fun . on March 30, 2018, 06:17:00 am
I cant remember if the 570 had some kind of epa stops on the H and L or not.  Do you have full adjustment all the way in and out?

IPL shows yes there appears to be the plastic tab stops on them. Need to trim them off to give full adjustments.  Page 15 on mine.

Husqvarna 570 575 IPL  http://s30387.gridserver.com/partsDiagrams/Husqvarna%20570%20and%20575.pdf
Title: Re: husky 570 starts but bogs bad
Post by: joel4bs on March 30, 2018, 10:35:37 am
The previous owner of the saw must have taken the stops off...I am able to adjust the L and H fully both in and out.
I inherited this saw from an old old friend who died last year...(nothing to do with the saw)...he always kept it running well...and I feel bad that it is not now...
by the way, the black etched plate thing seems to indicate that it is a 2009