Chainsaw Repair

For Sale - Wanted - Trades - Swaps - Stolen - Recalls - Lost => Locked Sale and Wanted threads => Topic started by: Cut4fun . on June 10, 2018, 05:01:19 pm

Title: Echo 590 20"
Post by: Cut4fun . on June 10, 2018, 05:01:19 pm
The echo 590 I bought from a guy will go up for sale as soon as the testing is finished this weekend.  Guy about 2hrs from me bought it new and used during the winter for his homeowner firewood cutting.  IMO looking at spur and saw itself cant be much use on it.
45mm bore with 37.6mm stroke
I have never pulled the muffler to look at piston because it runs great and psi feels great.  Never even  pulled the limiter caps to fine tune it.

$300 plus shipping.  Might take right trades too.

Just taking pics from thread. If you cant see them let me know. 

(http://chainsawrepair.createaforum.com/index.php?action=dlattach;topic=3434.0;attach=24230;image)
(http://chainsawrepair.createaforum.com/index.php?action=dlattach;topic=3434.0;attach=24232;image)
(http://chainsawrepair.createaforum.com/index.php?action=dlattach;topic=3434.0;attach=24234;image)
(http://chainsawrepair.createaforum.com/index.php?action=dlattach;topic=3434.0;attach=24236;image)
(http://chainsawrepair.createaforum.com/index.php?action=dlattach;topic=3434.0;attach=24495;image)
(http://chainsawrepair.createaforum.com/index.php?action=dlattach;topic=3434.0;attach=24497;image)
(http://chainsawrepair.createaforum.com/index.php?action=dlattach;topic=3434.0;attach=24499;image)




Title: Re: Echo 590 20"
Post by: Cut4fun . on June 15, 2018, 11:11:09 am
I couldnt stand the factory tune that the stops allowed me. Pulled them both for fine tuning today.  Much better in the cuts now too.

It had a slight bog at transition I couldn't stand.  I couldnt open the L up any further due to the stop tab.    All better now.

I saved them if new owner wants them installed back someday.
Title: Re: Echo 590 20"
Post by: Cut4fun . on June 17, 2018, 09:33:21 am
Someone  from here wants it  I will do 300 shipped. That is figuring probably about $50 for fedex shipping with 300 insurance.

 If it is here to long I might be pulling the muffler to open it some next. Just pulling the dang plastic stop tabs on H L to fine tune the carb helped.
Title: Re: Echo 590 20"
Post by: Cut4fun . on June 19, 2018, 01:17:24 pm
Glad I pulled muffler for modding today after testing in the 8x8 with stock lgx nib chain. Dang piston must have scored from being to lean with the epa plastic stop. If I recall right I fattened it up as far as I could go when I got it and then pulled the stops this weekend. So saw is NOT for sale at this time. EN still was pulling 140psi and still runs fine.

Pics in thread above. 
Title: Re: Echo 590 20"
Post by: Cut4fun . on June 27, 2018, 03:28:04 pm
Fixed it with new oem piston kit. But going to keep around for time being.  NLFS