Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Efco Olympyk Oleo-Mac => Topic started by: Cut4fun . on July 05, 2018, 08:34:21 am
-
Cub Cadet 5720 5018 Guessing Efco 156 and 152 https://www.partstree.com/parts/cub-cadet/saws-chainsaw/cs-5720-59an659-050-59an659-150-59an659-750-cub-cadet-commercial-chainsaw/
owners manual https://www.manualslib.com/manual/33897/Cub-Cadet-Commercial-Cs5720.html
CS 5720 2008 $459.00
Engine Size Cubic Centimeters: 56.5
Engine Size Cubic Inches: 0
Dry Weight: 14
Bar Oiler Type: Automatic
Bar Length: 20
CS 5720 2007 $459.00
Engine Size Cubic Centimeters: 56.5
Engine Size Cubic Inches: 0
Dry Weight: 14
Bar Oiler Type: Automatic
Bar Length: 20
CS 5720 2006 $459.00
Engine Size Cubic Centimeters: 56.5
Engine Size Cubic Inches: 0
Dry Weight: 14
Bar Oiler Type: Automatic
Bar Length: 20
CS 5720 2005 $499.00
Engine Size Cubic Centimeters: 56.5
Engine Size Cubic Inches: 0
Dry Weight: 14
Bar Oiler Type: Automatic
Bar Length: 20
CS 5720 2004 $499.00
Engine Size Cubic Centimeters: 56.5
Engine Size Cubic Inches: 0
Dry Weight: 14
Bar Oiler Type: Automatic
Bar Length: 20
-
Pics I was shown of cub cadet 5720 5020 efco
-
5018 https://www.partstree.com/parts/cub-cadet/saws-chainsaw/cs-5018-59am658-050-59am658-150-59am658-750-cub-cadet-commercial-chainsaw/
owners manual https://www.manualslib.com/manual/500561/Cub-Cadet-Cs5018.html
Chain Saws Cub Cadet 2007 CS 5018
Engine Size Cubic Centimeters: 50
Engine Size Cubic Inches: 0
Dry Weight: 12
Bar Oiler Type: Automatic
Bar Length: 18
2 Chain Saws Cub Cadet 2006 CS 5018
Engine Size Cubic Centimeters: 50
Engine Size Cubic Inches: 0
Dry Weight: 12
Bar Oiler Type: Automatic
Bar Length: 18
3 Chain Saws Cub Cadet 2005 CS 5018
Engine Size Cubic Centimeters: 50
Engine Size Cubic Inches: 0
Dry Weight: 12
Bar Oiler Type: Automatic
Bar Length: 18
4 Chain Saws Cub Cadet 2004 CS 5018
Engine Size Cubic Centimeters: 50
Engine Size Cubic Inches: 0
Dry Weight: 12
Bar Oiler Type: Automatic
Bar Length: 18
-
Yes, those are the correct models.
When Cub Cadet discontinued the saws, they dumped huge numbers of the 18" and 20" [CC branded K095] bars for the 5720 onto dealers to closeout. They would show up on ebay for really cheap money. Those seem to have dried up and now everyone is pricing them above what they are worth.
-
In the shop waiting on me to check them some day.
https://www.efcopower.com/products/chainsaws/156
https://www.efcopower.com/products/chainsaws/152
efco 156 ipl https://www.efcopower.com/sites/default/files/156_IPL_0.pdf
manual https://www.efcopower.com/sites/default/files/156-165_USA_B_1.pdf
efco 152 ipl https://www.efcopower.com/sites/default/files/152_IPL_0.pdf
manual https://www.efcopower.com/sites/default/files/147-152_USA_C_0.pdf
-
Went through the 156 and its good to go. Runs and cuts as it should.
Figured out why I couldnt get 152 started. When check seen it had wet plug and spark. So puled muffler even though had compression. Started to score and least 1 ring stuck for sure. So will be digging deeper in the 152.
Only bought the 152 for a bonus when buying the 156 from owner. 156 was the one I wanted. Like how the 152 is built and not a clamshell for a homeowner saw. 156 pro style imo, mag case etc.
-
50 52 seems to be 45mm bore 50082014a piston kit
ring 50080013r
57 56 seems to be 46mm bore
using the bore and figuring cc claimed that would make the 50 52 32.5mm stroke and the 56 57 34mm stroke
-
50 52 the way it uses the mag lower end then bolted into a plastic case with bolt on cylinder.
pic
-
152
ENGINE:
Displacement:
3.15 cu. in (51.7 cc)
Bore:
1.77 in (45 mm)
Stroke:
1.28 in (32.5 mm)
PERFORMANCE:
Idle Speed:
2,700 RPM ± 200
WOT (With Bar & Chain):
12,500 ± 500 RPM
Power:
3.4 hp/2.5kW (9,000 RPM)
-
156
165
ENGINE:
ENGINE:
Displacement:
3.45 cu. in (56.5 cc)
Displacement:
3.87 cu. in (63.4 cc)
Bore:
1.81 in (46 mm)
Bore:
1.89 in (48 mm)
Stroke:
1.34 in (34 mm)
Stroke:
1.38 in (35 mm)
PERFORMANCE:
PERFORMANCE:
Idle Speed:
2,800 RPM
Idle Speed:
2,800 RPM
WOT (With Bar & Chain): 13,000 ± 500 RPM
WOT (With Bar & Chain): 13,000 ± 500 RPM
Power:
4.1 HP/3.1kW (9,000 RPM) Power:
4.3 HP/3.2kW (9,000 RPM)
IGNITION SYSTEM:
IGNITION SYSTEM:
Spark Plug:
NGK BPMR6A
Spark Plug:
NGK BPMR8Y
Spark Plug Gap:
0.02 in. (0.5 mm)
Spark Plug Gap:
0.02 in. (0.5 mm)
156 and 165
FUEL AND OIL SYSTEMS:
Carburetor:
Multi Position Diaphragm Carburetor
Fuel Tank Capacity:
23.67 oz. (700 ml)
Fuel Mix:
See Operation-Fueling Section
Oil Tank Capacity:
11.83 oz. (350 ml)
Chain Lubrication:
Automatic Speed Controlled Positive Displacement Pump
-
Efco 152 952 5200 JD 52 CC 5018 5220 are such a easy homeowner ranch level saw to work on IMHO.
The 45mm piston I had on hand was so close.
-
A friend needs a coil for his cs5220 and ask me where to get one and I don't know, anyone know a good place. He said he tried several places's in Chattanooga, Tenn. with no luck.
Thanks
DJ
-
I'll have to look but I have been ordering them from SLP I think.
-
Sorry it was SLE Equipment. https://sleequipment.com
Just about everything has to be ordered but in my experience, everything is drop shipped from the distributor as soon as the parts arrive from overseas.