Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => McCulloch => Topic started by: terry.ivester on October 07, 2018, 03:52:28 pm


Title: McCulloch MS1434 NAV
Post by: terry.ivester on October 07, 2018, 03:52:28 pm
I am new here and did some small engine repair in my youth but I am a little rusty.  So I have a McCulloch MS1434NAV that was given to me because I enjoy tinkering with older saws.  The saw will start when fuel is sprayed into the carburetor but will not start otherwise.  Any suggestions on where to start on identifying the problem?
Title: Re: McCulloch MS1434 NAV
Post by: Cut4fun . on October 07, 2018, 04:45:40 pm
 McCulloch 1434  IPL http://s30387.gridserver.com/partsDiagrams/McCulloch%20MS1434NAV%20MS1436NAV%20and%20MS1636NAV.pdf

Does above IPL look like the saw?

I would be checking. 1 Is fuel filter connectected to fuel line in tank. 2 Is fuel line broken or **** anywhere going to carb connection.   3 Carb checking to see if it needs a new carb kit. Diaphragms get stiff and wont draw fuel.