Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Husqvarna => Topic started by: Cut4fun on March 18, 2019, 07:52:16 am
-
Well looky there the guy I warn folks about got another buyer. 1:10 in shows the tag of the builder.
Wasnt the cranks fault either. The pos build itself. Just got to watch the whole series of videos on the tear down. :o
Not IF but WHEN will his hotsaw builds come apart. Batting 100% so far. This one didnt even make to the first race.
Feel for the owner. Folks just waste their $ using this guy.
Heck the saws wont place if a Helsel Bretrand Marcel saw is there anyways. Unless a operator error etc.
https://youtu.be/6kw04zeW8tk
-
It wasnt the 1st. At least 3 I know of now over the years.
Hear there is a fire sell recall going on now too. ;) Shoddy work has been exposed.
-
I've seen the videos of the inside too. ;) All I will say you need to go look at that BS for yourself.
Never seen a intake done on a $3000 saw like this before either smh. I know what my 3K saw had and it wasnt that BS. : :o
-
https://www.youtube.com/playlist?list=PLaq37KCd_IFYS9GWAKF6gb2Yk6JlCF6v6
-
https://www.youtube.com/playlist?list=PLaq37KCd_IFYS9GWAKF6gb2Yk6JlCF6v6
Thanks for sharing here. Didnt know if you wanted the rest shown or not.
Glad you believe on spreading the word to warn others too.
-
My favorite saying when crap like this turns up on this pos again and again and again.
-
Shawn posted another video last night. Link above.. How to NOT build 3140 racesaws :D
Hear the newest one having issues already too. Hmmmm must not be the big end crank bearing like the pos is claiming on Dave's. Just look at the shoddy work and you can tell it was way more that made it all explode.
https://youtu.be/K3CenN7d30Y
-
Shawn found this in the stinger trying to get out. :D
His pic. 8)
-
I think he said his dog was trying to cover the stench. aka bury it too..
-
https://www.youtube.com/playlist?list=PLaq37KCd_IFYS9GWAKF6gb2Yk6JlCF6v6
Damn
-
This was posted in thread a few days ago we got going on this at CRG
I will say this now that this is done. When I seen this saw on muffler last year on video. I said to myself. That saw wasnt running right. Reason I showed my Helsel saw on muffler. Hoping Dave would catch the difference in the motors sound.
Listen to the motor. To me it dont sound right even
https://youtu.be/IjTIaf-U7hI
Now listen to this Helsel saw after the flush clears out after 1st cut. Above and this one on muffler too. Not even a race chain on it. Dubbed up corner chain I had on hand to test saw with.
https://youtu.be/8S-GqEFirBk
-
From the pics there dont look to be one thing on this saw that wasnt a hack job :o :o. Shame on the builder ec shame!
-
Shawn said over in CRG = Another video has been added to the playlist. If anyone has a racesaw with him they should demand it back! It's easier to start from scratch. He'll point blame and if his lips are moving, he's lying!
I said = finally someone else has seen through his BS!
9 years later he has been exposed again........................ This time with pics video and more then one person. WTG
-
newest video
https://youtu.be/u8Uk8x5UjVs?list=PLaq37KCd_IFYS9GWAKF6gb2Yk6JlCF6v6
-
Here is a pic showing how shoddy the top of cylinder off off. It can been seen in video showing how it was off going around all uneven.
Here it is after Shawn did the machine work making even.
-
Here is the intake side with a gob of BS stench work.
Here it is dug out to be done right. Shawn digging in because Dave dont want pos ec touching the saw again.
-
Going to try and put all videos together here for ya.
https://youtu.be/6kw04zeW8tk
https://youtu.be/mimp5X1dajc
https://youtu.be/-Dd0poTVXyA
https://youtu.be/nEL2zG-FyLE
https://youtu.be/PsHsWv3Sz6Y
https://youtu.be/QpTbNWVcRK4
https://youtu.be/a7PTOg9AJFI
https://youtu.be/xdqZhWMtLAs
https://youtu.be/aZOF6ARBNyw
https://youtu.be/4c-WleFsHKI
https://youtu.be/u8Uk8x5UjVs
https://youtu.be/-hl6Zys9QTo
-
Per squarefile pics
Hmmmmm off on all 4 corners no matter how you check them.
You get the idea with just a few pics of the shoddy work in this 3140
pos ec saws tapped the holes crooked for the key locking inserts.
-
:o
SF = Another video added!
I really feel bad for his customers of mad rush before work season that get his race saws. You were lied to over and over. This would of never been "right"! If I can't fix these cases, then how can he? He Destroyed them in 5minutes!!!
Hopefully the rest will be right. For the sport, and hard earned money.
https://youtu.be/mhIdlq0JUdo
-
Showing more shoddy ec work
-
I posted this over on CRG.
Hey Shawn a while back a guy here and on another forum said it was just all crowing without proof. Been having fun with it ever since you have provided the proof in videos and pics. ;) Why you will see the rooster crowing videos etc. ;) I'd rather buy a stock saw then a fuking ec saw. 😂
-
Split it out of a real hotsaw thread and gave the pos ec saw it's on thread to warn folks.
-
https://youtu.be/p-lAWZBHHgw
-
@SquareFile someone in the back ground crying alittle?
I even pinned it so it never rotates down the board. ;)
You did such a good job exposing this pos work.
-
"Fixed" LOL! In 7weeks from the day of first blow up. Time laps just don't add up with all the shipping and Falicon preparing to close shop, hmmm.
https://youtu.be/d8BocB0yoS0
-
Saw dont sound right. Cant even make 1 cut without run on.