Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Husqvarna => Topic started by: 660magnum on February 07, 2012, 01:38:06 pm
-
The two together
(http://img.photobucket.com/albums/v11/jamesirl/KGrHqUOKpYE6cBIFpYZBOoGfGUJLw60_3.jpg?t=1328635354)
inside the 44mm cylinder with the exhaust on the right and the carb intake on the left
(http://img.photobucket.com/albums/v11/jamesirl/KGrHqQOKjoE6WIlI-wBOoGfnbb3w60_3.jpg?t=1328635964)
Cylinder from the PTO or chain side
(http://img.photobucket.com/albums/v11/jamesirl/KGrHqEOKiME6Unl7hf9BOoGfNzIKw60_3.jpg?t=1328637037)
-
The cylinder from the exhaust side.
(http://img.photobucket.com/albums/v11/jamesirl/KGrHqUOKowE5380lRRQBOoGf3EKw60_3.jpg?t=1328637237)
Cylinder from the flywheel side
(http://img.photobucket.com/albums/v11/jamesirl/KGrHqQOKosE6edl0OrBOoGfe6Skw60_3.jpg?t=1328637419)
Piston intake side
(http://img.photobucket.com/albums/v11/jamesirl/KGrHqUOKi0E6cQpbLF7BOoGf6HHg60_3.jpg?t=1328637611)
-
Inside the 346XP NE 44mm piston
(http://img.photobucket.com/albums/v11/jamesirl/KGrHqYOKiYE6MvLd2FEBOoGgCw0wQ60_3.jpg?t=1328637818)
Piston top
(http://img.photobucket.com/albums/v11/jamesirl/KGrHqMOKjkE6ZO-09KdBOoGgN1rW60_3.jpg?t=1328638024)
Piston wrist pin detail
(http://img.photobucket.com/albums/v11/jamesirl/KGrHqYOKiQE5KcdLBOoGgWRlKQ60_3.jpg?t=1328638179)
Piston wrist pin detail other side with no clip
(http://img.photobucket.com/albums/v11/jamesirl/KGrHqUOKjkE6rd5g1BOoGgdw-MQ60_3.jpg?t=1328638296)
-
Kolben Meteor Replacement piston for Husqvarna 46XP NE 44mm
(http://img.photobucket.com/albums/v11/jamesirl/KGrHqIOKnME2d-NGWgBN0mjOl7Q0_3.jpg?t=1328641580)
-
Two questions on the Meteor;
1) Who makes their kits, and where?
2) Are the bores real Nikasil, or are they something else? I understand that is very important (my brother say so, and he would know).