Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Husqvarna => Topic started by: EG on February 07, 2020, 11:48:31 pm

Title: Husqvarna 445 Carburetor Removal
Post by: EG on February 07, 2020, 11:48:31 pm
Can someone advise me on how to remove the carburetor.  I have removed all the bolts and filter and the carburetor is loose.  However, there its something preventing me from being able to remove the carburetor and it appears to be under the start stop choke lever
Title: Re: Husqvarna 445 Carburetor Removal
Post by: Cut4fun . on February 08, 2020, 07:13:11 am
Check the 450 thread here. I may show it already.
Title: Re: Husqvarna 445 Carburetor Removal
Post by: Cut4fun . on February 08, 2020, 07:15:33 am
Link. http://chainsawrepair.createaforum.com/husqvarna/husqvarna-450-2274/10/

It just says I took the carb off. So there is nothing hard about it straight up removal.   
Title: Re: Husqvarna 445 Carburetor Removal
Post by: Cut4fun . on February 08, 2020, 07:19:31 am
scroll through this for steps  https://chainsaw-workshop-manual.com/husqvarna-445-445-e-and-450-e-carburetor-repair/

Lot more there then I have ever had to do.  I just pull carb and rebuild or a new one if bad carb.