Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Poulan => Topic started by: Cut4fun . on February 11, 2020, 09:36:57 am

Title: NOS poulan parts Used poulan parts
Post by: Cut4fun . on February 11, 2020, 09:36:57 am
There is a guy selling a ton of poulan nos parts in the CRG.  Bow parts etc etc etc.

Thought of a few of you since you like to restore with decals.

Title: Re: NOS poulan decal sticker
Post by: Fishnuts2 on February 11, 2020, 09:54:56 am
I'm not on FB, but does he have a decal for a 53?
Title: Re: NOS poulan decal sticker
Post by: Cut4fun . on February 11, 2020, 12:17:13 pm
I'm not on FB, but does he have a decal for a 53?

What you see in the 100's. 
Title: Re: NOS poulan decal sticker
Post by: Fishnuts2 on February 11, 2020, 09:06:25 pm
Could you send me a link to these parts?
Title: Re: NOS poulan decal sticker
Post by: Cut4fun . on February 12, 2020, 07:41:58 am
Could you send me a link to these parts?

Cant sent actual link right to his post.  Least I'm not smart enough to.
Here is where he has started posting them.  chainsaw repair group facebook https://www.facebook.com/groups/415662708518445/
Title: Re: NOS poulan parts cylinders pistons
Post by: Cut4fun . on February 12, 2020, 09:02:09 pm
Picked up some NOS poulan cylinder pistons in boxes today. Some I know some I need to research.

Title: Re: NOS poulan parts
Post by: Cut4fun . on February 13, 2020, 09:24:17 am
Quick check of the 2 boxes worth before calling it a day. Like 5mins of a check   :D


One I think is a nos 335 c and the piston says 335 but it isnt thin ring. So might be a the 335 predator single ring piston.
Seen a nos 295 c and p with lower clam. Think couple of pioneer nos pistons too. Others no clue.
Some weedwacker stuff. No interest in those whatsoever. 
1 coil
Think a couple pioneer nos piston in the white boxes

Title: Re: NOS poulan parts
Post by: Cut4fun . on February 13, 2020, 12:08:54 pm
Now to see if I was right on some and what the heck some are. 

Title: Re: NOS poulan parts
Post by: Cut4fun . on February 13, 2020, 01:21:56 pm
Think I got them all figured out but 1. Some of the ones I thought poulan, were pioneer x3 cylinders. P28, then WT coil, K650 partner cyl, P 3450 T1, P 2750 2775 295, PP114, gasket K650 700, Piston 336 3450 330, 2775 2750 295, P26-P28? and one I cant figure pioneer 475350 or 507475350

Hmmm forgot to write # down for 1. Got more in pic then wrote down. LOL

All I could find on that weird clamshell looking thing  36zd3 38cc   Bingo jonsered 370
Title: Re: NOS poulan parts
Post by: Cut4fun . on February 13, 2020, 04:59:17 pm
Chipsflyin found this. P26 piston #507475350, ( Jacks Small Engines ) NEW- $12.78+ shipping"

Edit:
The cylinder that goes with is # 507431400

I told him this  - Only difference I noticed in the 2 Pio pistons. One of then had one side with narrower skirt. Both went into all 3 cylinders same fit it seemed.
Title: Re: NOS poulan parts
Post by: Cut4fun . on February 14, 2020, 07:42:11 am
The last piston come back to P26. Only difference I see in it and other piston I think is P28 is one skirt on the 26 is narrower. The 3 cylinders came back to P29 and or P26. I dont know these saws at all.
The Partner 650 cylinder should bolt right up to P55 P65 650 700 7000. PP114 is a polesaw, Jred 370 cylinder, Poulan 2750 PP295 cylinder and piston. Only stuff I see for my uses is the is the Poulan 335 3450 P+c stuff.

So if some poulan, pioneer, partner folks need something for a restore.  I dont do that ebay high price crap some do. I will practically give what I dont want away. ;)
Title: Re: NOS poulan parts
Post by: Fishnuts2 on February 14, 2020, 09:37:49 am
If one of those cylinders fit a Pioneer 1073 I'd be interested.
Title: Re: NOS poulan parts
Post by: Cut4fun . on February 14, 2020, 02:40:46 pm
If one of those cylinders fit a Pioneer 1073 I'd be interested.

Only Pioneer is 26 28
Title: Re: NOS poulan parts
Post by: Cut4fun . on April 25, 2020, 01:33:51 pm
Was digging today for someone in need.

Checking my last 2 54cc saws before committing any of my 46.5mm pistons. Only used p I have left not sellers. 4 3450 330 cylinder in used left. One super nice. Have one 3.3 54cc 335 NOS p+c set. P would work but like to keep that set together.

Guy on the chainsaw repair group FB was wanting a nice set for a restore saw for a friend.

Forgot about these. Looks like 3 good 46.5cc 54cc pistons possibly.

Imo best set off those 3 above. Like new
Title: Re: NOS poulan parts
Post by: Cut4fun . on April 25, 2020, 01:38:29 pm
Also dont forget I have a new poulan 295 cylinder and piston set. I will ever use these if someone wants to trade or buy.

Title: Re: NOS poulan parts
Post by: Cut4fun . on April 26, 2020, 07:06:33 pm
Last pics before trading off to help the guy with build.


Poulan 330 piston and cylinder in nice shape
Title: Re: NOS poulan parts
Post by: Cut4fun . on May 12, 2020, 01:05:37 pm
Just saving pics of some poulan parts. There is tons more not in pics.
Taken of just these series.

Somebody asking me to part with one of my 3.3 335's I havent finished putting lines in yet. Have 3 runners already. Bought them for parts. But will be runners easy.
Title: Re: NOS poulan parts
Post by: Cut4fun . on May 12, 2020, 01:06:06 pm
1 more

Title: Re: NOS poulan parts
Post by: 3000 FPS on May 12, 2020, 11:46:12 pm
That is a lot of parts.   
Title: Re: NOS poulan parts
Post by: Cut4fun . on May 18, 2020, 08:51:10 am
Was showing a AS member this poulan 335 predator 330 3450 46.5mm piston.  We are thinking someone put a bare piston in a 3300 bare bore cylinder. He said 360 scoring.   Not thinking straight gassed.

Just saving this NOS piston pic

Title: Re: NOS poulan parts
Post by: Cut4fun . on June 10, 2020, 11:59:30 am
If the poulan 505 leaves Sunday.

This poulan 505 475 445 425 415 jonsered 2077 2083 2083II full wrap handle can be sold.   Big dawgs to sell too to install full wrap too.  What I got in them. PM if interested.

Might sell the other one off the PP445 too. 


Back left in pic.






Title: Re: NOS poulan parts
Post by: Cut4fun on June 11, 2020, 07:20:04 am
If someone was wanting one of these NLA new west coast set ups.

Full wrap handle for Poulan 415 425 445 475 505 Jonsered 2083 2077 2083ll Partner 7700 710 660. Big west coast dawgs needed to mount full wrap handle on these. Inner and outer.

Nicest one of my 2 full wraps.

Will also be in the for sale board here.

Title: Re: NOS poulan parts
Post by: Cut4fun on June 12, 2020, 07:32:45 am
All of this style poulan air filter NOS I have left. Still have some used too.

Title: Re: NOS poulan parts
Post by: Cut4fun . on June 14, 2020, 07:41:02 am
 Both FULL wraps and dawgs etc SOLD

PP445 will be next. One of them for  with nicest 445 covers.  Prob the one I didnt have to redneck repair the case by muffler.  One in pic that had full wrap.
Title: Re: NOS poulan parts Used poulan parts
Post by: Cut4fun . on June 21, 2020, 10:34:21 am
Freaking run yesterday digging up used poulan parts for folks in the CRG

Title: Re: NOS poulan parts Used poulan parts
Post by: Cut4fun on June 25, 2020, 11:20:15 am
Collectors wanting my poulan rollernose bars. So got them out.

Guessing 14" being 16 1/4" long.  One 1/4" chain was 77DL. Didnt count the other 2.

Had 3 sets of bars and chain. 1 set already sold and shipped.

Title: Re: NOS poulan parts Used poulan parts
Post by: Cut4fun on June 27, 2020, 08:15:19 am
Nos poulan clutch cover and recoil cover and some used ones too.

Was digging out some parts to throw a recoil together to test a redneck idea I seen on CRG. ;)

Was surprised how well it does work. Even matches the 372 cover I done to test to see.



Title: Re: NOS poulan parts Used poulan parts
Post by: Cut4fun . on June 27, 2020, 03:02:40 pm
Showing folks the NLA poulan pulley in shallow , deep and later

How the deep could go on the guys 3300 with the shallow set up with same flywheel. If he had a deep cover too.



Title: Re: NOS poulan parts Used poulan parts
Post by: Cut4fun . on June 27, 2020, 03:04:51 pm
Had to laugh after setting up the recoil right and setting saw back on shelf. Least now another whole recoil to use.

Title: Re: NOS poulan parts Used poulan parts
Post by: 3000 FPS on June 28, 2020, 12:12:49 am
Looks like you are really cleaning house.