Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Chainsaws not listed - Gas OPE => Topic started by: Cut4fun . on March 08, 2020, 12:52:56 pm

Title: Holzfforma G444 Hutzl Farmertec
Post by: Cut4fun . on March 08, 2020, 12:52:56 pm
Have a G444 coming in next to test out.   Here is a video of the Holzfforma 71cc 444 with a 462 back to back same chain.

https://youtu.be/6HIghfa5ZrQ
Title: Re: Holzfforma G444
Post by: Cut4fun . on March 12, 2020, 02:14:03 pm
9 days 444 and 20” test unit.

 Needed to remove the plastic piece on handle and tweak it some in 2 directions on pto side. All good now.
Title: Re: Holzfforma G444
Post by: Cut4fun . on March 12, 2020, 02:17:10 pm
G444 testing started. Left stock spark plug and decomp in this this one. Manny says all issues with that stuff is in the past.





Title: Re: Holzfforma G444
Post by: Cut4fun . on March 12, 2020, 05:48:57 pm
I had primed first time starting after going through things. Just noticed choke wasn’t closing when let cool down and trying to start again.

Wasnt anything just the plastic control deal catching up. Good to go fired off first pull with choke working.
No photo description available.
Title: Re: Holzfforma G444
Post by: Cut4fun . on March 18, 2020, 08:35:55 am
The 444 is super fat still. Around 11k out of the cut. The 2 445 are set right around 2k more out of the cut. For being fat and first tank. I was super happy how they compared in the ash test log. 20” buried.
I feel I don’t have to worry about the no longer available parts I been saving back for my saws. One 445 I ran 24” to finish off the log.

Title: Re: Holzfforma G444 Hutzl Farmertec
Post by: Cut4fun . on May 23, 2022, 08:50:04 am
https://youtu.be/B_37ruzTyxI
Title: Re: Holzfforma G444 Hutzl Farmertec
Post by: Cut4fun . on May 23, 2022, 04:23:02 pm
Dyno runs from stock to wild