Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Husqvarna => Topic started by: martang on May 04, 2020, 12:54:44 pm
-
my k760 saw runs very well but when it's not in use it leaks fuel, from directly underneath the throttle trigger a constant slow leak of fuel and it doesn't stop until tank is empty. I've had the carb out a few times now fitted new fuel pipes new fuel pressure bubble cleaned everything but still the problem exists. Anyone have any ideas?
-
my husqvarna k760 runs great but when its not in use it slowly leaks fuel from directly underneath the throttle trigger, it does this constantly until fuel tank is empty. I have put new fuel pipes on and cleaned everything but it continues to leak. Any thoughts welcome !
-
IPL https://www.ereplacementparts.com/husqvarna-k760-power-cutter-parts-c-114486_118655_198127.html
Leaking past the tank vent #7. I dont know the saw so just using IPL pic for area. @3000 FPS is this one the saws you been in?
-
IPL https://www.ereplacementparts.com/husqvarna-k760-power-cutter-parts-c-114486_118655_198127.html
Leaking past the tank vent #7. I dont know the saw so just using IPL pic for area. @3000 FPS is this one the saws you been in?
I worked on some the K760 saws when I working part time before retiring. I agree with cut4fun that it could be the tank vent.
I have a K960 here at home that I got free and completely rebuilt it.
-
Picture of the K960 I have.
-
my husqvarna k760 runs great but when its not in use it slowly leaks fuel from directly underneath the throttle trigger, it does this constantly until fuel tank is empty. I have put new fuel pipes on and cleaned everything but it continues to leak. Any thoughts welcome !
Check your messages for an ipl and service manual