Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Husqvarna => Topic started by: Cut4fun on July 22, 2020, 08:10:49 am

Title: Husqvarna 440
Post by: Cut4fun on July 22, 2020, 08:10:49 am

Trying to save this husky 440 for a local. Backed over it.

325 bar with 3/8 chain too. 🤦‍♂️

Title: Re: Husqvarna 440
Post by: Cut4fun on July 25, 2020, 10:14:38 am

Saved. Dang the factory carb settings sucked 👎. So much better now.

Title: Re: Husqvarna 440
Post by: Cut4fun . on December 10, 2020, 10:18:49 am

Husqvarna 440 IPL for another one in
https://www.hsqintec.sk/vykres/h440e-mot.-pila.pdf

Title: Re: Husqvarna 440
Post by: Cut4fun . on December 10, 2020, 01:50:43 pm

Starter pulley 5866596-01  586659601

shows superseded to 586659602

This 537423201 shows to work too   ?

Title: Re: Husqvarna 440
Post by: Cut4fun on December 11, 2020, 07:05:34 am

Spring end not broken but bending. Plastic part started breaking and jammed it up.

Able to reuse everything this time to save him $. But next time going to be a pulley set.

Title: Re: Husqvarna 440
Post by: Cut4fun . on July 09, 2021, 08:35:51 am

Another 440 in with bad spring assist crap. Going to see about switching to regular set up.  Guy that owns saw works out big time, dont need no assist.  504597002

544287002  504597002

Title: Re: Husqvarna 440
Post by: Cut4fun . on July 20, 2021, 07:34:35 am

Back to owner.