Chainsaw Repair

Chain - Grinders - Filing - Wood Milling - Tools - Welding - Machinist - Mowers - Tillers => Chain - Bars - Grinders - Filing => Topic started by: Cut4fun . on August 26, 2021, 07:07:09 am

Title: Cannon super mini narrow kerf
Post by: Cut4fun . on August 26, 2021, 07:07:09 am
cannon super mini

6K Danzco 3/8LP picco 7T rim.

Small mount husky 18" 3/8LP picco bar with a 325 tip too for switching.  For a 550 mkII



Title: Re: Cannon super mini narrow kerf
Post by: Elden on September 04, 2021, 02:02:18 am
Curious. Son runs Stihl 192 and 193. He got one (193?) with OILOMATIC® STIHL PICCO™ Micro™ Mini 3 (PMM3). These are his air (bucket) saws. He really likes the performance the micro mini chain, consequently is switching  to Oregon 90PX 3/8 Low Profile .043 gauge narrow kerf AdvanceCut saw chain for all his air saws. What are the benefits of the Cannon bars and other such bars that you speak of from time to time over the Stihl bars?
Title: Re: Cannon super mini narrow kerf
Post by: Cut4fun . on September 04, 2021, 07:00:47 am
These are so guys can run them on the husky small K095 mounts and the larger stihl D025 mounts when bar bought for them.

I wouldnt see anything gained on a small saw. Besides a better wearing bar then the little stihl cheap bars for those saws.  But I dont believe cannon even makes them for those. 
Title: Re: Cannon super mini narrow kerf
Post by: Elden on September 04, 2021, 09:53:49 pm
Thanks, that makes sense.