Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Chainsaws not listed - Gas OPE => Topic started by: Cut4fun . on April 22, 2022, 07:41:15 am
-
Farmertec G395xp. Looks like prebuilts for now will be in the royal blue. The kits probably the orange.
-
Farmertec G395 is released for sale
Blue, Orange and a Pro model with upgrades can be had.
-
Orange and blue prebuilts preorder is $339.99 shipped by Jes in MT dealer.
Pic of orange. Blue ready to go. About another week on orange to ship from Farmertec.
-
US stock in blue here now. 359 shipped https://www.farmertec.com/US-STOCK-93-6cc-Holzfforma%C2%AE-G395XP-Gasoline-Chain-Saw-Power-Head-56mm-Bore-Without-Guide-Bar-and-Chain-Top-Quality-By-Farmertec-All-parts-are-For-Husqvarna-394-395-394XP-395XP-Chainsaw-2-4-Days-Delivery-Time-Fast-Shipping-p1057968.html
-
Farmertec 395. Curiosity got the better of me 😋
3 days to my door from Farmertec website US stock.
Orange or blue if your picky on a chainsaws color. Didn’t matter to me which.
Looks like a winner to me and can’t beat the Price IMHO. 339 from Jes or US stock Farmertec. 359 shipped.
Starts easy like they should.
-
Added this just for kicks. Left over from years back.
Most of the video dont do justice. They running them pig fat out of the box. 9-10K. I turned mine up to 12.2ish and rips like oem even on first cuts.
-
Orange ones in for a few days now.
Pic beside OEM 395 too by another USA dealer
-
When you sold all your longer D009. Only 24’s left. But you have 2 stihl mount in 32”.
I also want it to fit with 8T.
Redneck fitting since I don’t have those cool machines some of you have.
I just refuse to pay 80 another bar just to use when now it fits more saws on hand.
Is what it is. 😋
-
Overseas
https://youtu.be/vHHV2xfwWNQ
-
Shaun Carr's specs comparing his
Just saving info on Dukes 395 piston shared with me.
Converting.
Crown 2.1992" - 558596.8mm
Skirt 2.2037" - 55.97398mm
Mine didnt seem near as tight as his at the skirt measurements. Me cheap calipers though. His legit calipers.
-
Just put same piston in mine
https://youtu.be/RrWPm0g5lFM
-
I had ordered one of those dukes moly pistons kits for the G395. The $4.25 piston that comes in the Farmertec is hair off specs. Still runs good and great psi. But makes alittle noise from being out of spec.
See how those circlips are bent out. That isnt from me taking out. That was from install at factory. I still cant wrap my mind how they do that installing.
-
Only difference is the SawSalvage Dukes flat top piston kit added with their rings used too. Not even half tank through it.
Other with lower psi is the Farmertec $5 piston with caber F cast rings with less then 2 tanks. The piston that is not to specs. Like 55.86 compared to 55.94 55.95 55.96 A AB B
Base gasket still used. G395xp .045
-
350 shipped G395 against the pro version G660 450 shipped with meteor topends
List I made of my thoughts of the 2 saws.
I've done it out of curiosity myself with the G395. My G660 was a old blue tank one. G395 first batch blue.
Air filter set up 395
Oiler 395,
Weight G660 lighter.
395 outboard, 660 inboard.
660 side tensioner, 395 front tensioner.
I always knew 66 was lesser power but liked the less weight. Why I owned 5 oem 66's in past.
Only thing I still dont like on 395's is the little extra weight and be nice to have side tensioner too.
OEM dyno numbers. Both my G660 G395 beast. So figure out your wants and needs and support for saw.
https://youtu.be/7rbERQayjpA
-
G395 dyno
https://youtu.be/fJaeFrt3wmM
-
Stock OEM on Joe's dyno. Dyno's can read different. 395 592 660 661
specs from husky https://www.husqvarna.com/us/chainsaws/395xp/
-
Another guys stock farmertec 395
So to compare, the stock numbers on my 395 clone were:
Squish- .038”
Exhaust- 101
Transfers- 122
Blowdown- 21
Intake - 77
Stock Brazilian 395xp come from factory close to above. Per Paveen
Early swede ones had like 104/122/74 per Paveen
Then NH-894 numbers from one. .045 squish and another guys had .053 squish.
-
I was sticking a 24" on the Farmertec G395xp demo saw I got a year ago to show someone. I just realized where they got the idea for that blue color from.
-
https://youtu.be/dCjtdLXvWiw
-
Since folks asking about this. The first batch of orange G395xp on right that was painted over dull plastics to get them out there last year. Then the new ones on left that are molded in color. Easy to tell.