Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Echo => Topic started by: mweba on March 15, 2012, 08:37:50 pm

Title: Echo two piece ignition ( 500EVL )
Post by: mweba on March 15, 2012, 08:37:50 pm
Not sure how many models this if will pertain to.  I have a 500EVL with the two piece ignition.  The secondary was bad, which is the case with most two piece sets.  I have a pile of Husky two piece sets so I tested the swap out.  In this case a SEM secondary is a near bolt in swap.  Had to change an eyelet and move a mounting hole 1/8".  Primary or pickup is OE and it works perfectly with the SEM Husky part.


(http://farm8.staticflickr.com/7198/6985613803_bba2205a9d_z.jpg) (http://www.flickr.com/photos/mweba1/6985613803/)
500evl (http://www.flickr.com/photos/mweba1/6985613803/) by mweba1 (http://www.flickr.com/people/mweba1/), on Flickr