Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Echo => Topic started by: Cut4fun . on March 18, 2012, 09:07:46 pm
-
I forgot about Bob talking about this saw in his 1001 thread.
Echo 1201 IPL http://s30387.gridserver.com/partsDiagrams/Echo%20CS-1201.pdf
-
@echo nut Lee got a new in the box echo cs 1201 shipped over. Sent you a PM elsewhere too with pic.
I am only copying 1 pic. The shipper and Lee have many more to share.
@Uncle Lee
-
Nice!!
-
Wow...
-
I did purchase this saw. The seller is an absolute ace to deal with.
So good i now have my third one on it's way. They're a beautiful saw
and very well made. If anyone is interested in one, you can contact
Robin on AS. To my understanding these will be discontinued in the
next year according to his Echo dealer.
On a side note i was searching Aussie Ebay and found that an aftermarket
top end is available for the 1201. Thought that is awful strange since
there are so few of these saws around. Must be more of these around in
other countries than we thought.
Uncle Lee
-
@Uncle Lee he is here too username paveen88 selling them. paveen88 his thread here http://chainsawrepair.createaforum.com/for-sale/husky-288-61-372-stihl-381-070-echo-1201/
-
Yes kevin, Thats him. Didn't realize he had a thread here.
Really super guy to deal with. I had alot of bad thoughts
on the first saw thinking am i going to get it. But everything
has been fantastic. Just goe's to show you can't judge an
individual by there location.
Uncle Lee
-
1201 58mm bore x 44mm stroke 116cc
070 58mm bore x 40mm stroke 106cc
076/075 58mm bore x 42mm stroke 111cc
-
Owner of both saws shared info on some differences on the echo 1200 and echo 1201.
Somebody had ask him what was the differences in the 2 on CRG FB.
1201 updated coil which failed prematurely on 1200. Coil had a trigger unit/cdi attached to it, in cs1201 they moved the unit into the air box. Cs1200 had 4 piece clutch with bigger clutch sprocket, they went away with that and made 3piece clutch and smaller clutch sprocket for cs1201 which will interchange with 070. New tank handle that has a ridge that allows air filter rubber lip to seal better. Cylinder has new style mount for coil on cs1201, some old cs1200 had tilly carb. Cs1201 has walbro, apart from those its the same saw. Damn good milling saw i'll tell you that