Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Husqvarna => Topic started by: Cut4fun . on March 26, 2012, 12:44:38 pm

Title: Carbs on 357 359
Post by: Cut4fun . on March 26, 2012, 12:44:38 pm
Whats the difference in the walbro 199 and 175 that were used on the 357 359?   I dont ever recall a 175 on one and have only used the 199 in the past.

 The replacement zama doesn't like ported saws without some work.
Title: Re: Carbs on 357 359
Post by: Cut4fun . on March 26, 2012, 12:57:01 pm
HDA and HD carb specs

Choke Bore
17.44
17.44
19.01/17.44
19.01
22.19
Throttle Bore
15.84
17.44/15.84
17.44
19.00
20.56/19.01
Venturi
11.11
12.7
13.49
14.29/15.08
15.88/16.77


Zama C3 specs

BORE DIAMETER    VENTURI DIAMETER MM
C3        16MM    13.5
C3        17.5MM    13.5, 15
C3        19.0MM    15, 16
 
Title: Re: Carbs on 357 359
Post by: SawTroll on March 26, 2012, 04:05:16 pm
The reportedly "bad" walbros were the 190, 191, 198 and 199 (different numbers for EPA/not and heated/not heated saws). I don't really remember, but assume the 199 is EPA/not heated...... ;)
Title: Re: Carbs on 357 359
Post by: Mastermind on March 27, 2012, 11:59:17 pm
The reportedly "bad" walbros were the 190, 191, 198 and 199 (different numbers for EPA/not and heated/not heated saws). I don't really remember, but assume the 199 is EPA/not heated...... ;)
Whats the difference in the walbro 199 and 175 that were used on the 357 359?   I dont ever recall a 175 on one and have only used the 199 in the past.

 The replacement zama doesn't like ported saws without some work.

I'm gonna either put a 084 carb or the stock carb back on my 346........
Title: Re: Carbs on 357 359
Post by: Cut4fun . on August 07, 2013, 03:55:39 pm
660mag the walbro you noticed the choke not working on had to come apart.  Spray just barely got it moving a tad.  Couldn't get the shaft to work smoothly so I took it out to clean up. Time will tell.
Title: Re: Carbs on 357 359
Post by: 660magnum on August 07, 2013, 03:58:25 pm
That looked like a nice carb otherwise.
Title: Re: Carbs on 357 359
Post by: SawTroll on August 10, 2013, 03:09:27 pm
HDA and HD carb specs

 ......

Venturi
11.11
12.7
13.49
14.29/15.08
15.88/16.77
.....


At least one HD carb has a 17.46mm venturi (HD-12).
Title: Re: Carbs on 357 359
Post by: Cut4fun . on August 10, 2013, 03:16:20 pm
HDA and HD carb specs

 ......

Venturi
11.11
12.7
13.49
14.29/15.08
15.88/16.77
.....


At least one HD carb has a 17.46mm venturi (HD-12).

Stuff was left out on purpose on list.

Niko I dont remember what was pulled back when the post was made but we were looking up 357 359 carbs.  12 was on 372 wasnt it??? Look at thread title was just comparing them for 357 359.

Be my guest to go through them all if you like.   ;) ;D

  HDA-10-1
  HDA-101-1
  HDA-102-1
  HDA-103-1
  HDA-104-1
  HDA-105-1
  HDA-106-1
  HDA-107-1
  HDA-108-1
  HDA-109-1
  HDA-1-1
  HDA-110-1
  HDA-111-1
  HDA-112-1
  HDA-113-1
  HDA-114-1
  HDA-115-1
  HDA-116-1
  HDA-117-1
  HDA-118-1
  HDA-119-1
  HDA-120-1
  HDA-12-1
  HDA-122-1
  HDA-123-1
  HDA-125-1
  HDA-126-1
  HDA-127-1
  HDA-128-1
  HDA-130-1
  HDA-13-1
  HDA-131-1
  HDA-132-1
  HDA-133-1
  HDA-134-1
  HDA-135-1
  HDA-136-1
  HDA-137-1
  HDA-138-1
  HDA-139-1
  HDA-140-1
  HDA-14-1
  HDA-141-1
  HDA-142-1
  HDA-143-1
  HDA-144-1
  HDA-145-1
  HDA-146-1
  HDA-147-1
  HDA-148-1
  HDA-149-1
  HDA-150-1
  HDA-15-1
  HDA-151-1
  HDA-153-1
  HDA-154-1
  HDA-155-1
  HDA-156-1
  HDA-157-1
     HDA-158-1
  HDA-159-1
  HDA-160-1
  HDA-162-1
  HDA-164-1
  HDA-165-1
  HDA-166-1
  HDA-167-1
  HDA-168-1
  HDA-169-1
  HDA-170-1
  HDA-17-1
  HDA-171-1
  HDA-172-1
  HDA-173-1
  HDA-174-1
  HDA-175-1
  HDA-176-1
  HDA-177-1
  HDA-178-1
  HDA-179-1
  HDA-180-1
  HDA-18-1
  HDA-181-1
  HDA-182-1
  HDA-183-1
  HDA-184-1
  HDA-187-1
  HDA-188-1
  HDA-189-1
  HDA-190-1
  HDA-19-1
  HDA-191-1
  HDA-192-1
  HDA-193-1
  HDA-195-1
  HDA-196-1
  HDA-197-1
  HDA-198-1
  HDA-199-1
  HDA-20-1
  HDA-201-1
  HDA-202-1
  HDA-203-1
  HDA-204-1
  HDA-205-1
  HDA-206-1
  HDA-207-1
  HDA-208-1
  HDA-209-1
  HDA-210-1
  HDA-211-1
  HDA-212-1
  HDA-213-1
  HDA-214-1
  HDA-215-1
  HDA-216-1
  HDA-217-1
  HDA-218-1
     HDA-219-1
  HDA-220-1
  HDA-22-1
  HDA-221-1
  HDA-222-1
  HDA-223-1
  HDA-224-1
  HDA-225-1
  HDA-226-1
  HDA-227-1
  HDA-228-1
  HDA-229-1
  HDA-230-1
  HDA-23-1
  HDA-231-1
  HDA-232-1
  HDA-233-1
  HDA-234-1
  HDA-235-1
  HDA-236-1
  HDA-238-1
  HDA-239-1
  HDA-24-1
  HDA-244-1
  HDA-246-1
  HDA-248-1
  HDA-255-1
  HDA-256-1
  HDA-258-1
  HDA-26-1
  HDA-268-1
  HDA-269-1
  HDA-27-1
  HDA-271-1
  HDA-272-1
  HDA-274-1
  HDA-275-1
  HDA-28-1
  HDA-285-1
  HDA-286-1
  HDA-29-1
  HDA-297-1
  HDA-30-1
  HDA-301-1
  HDA-307-1
  HDA-308-1
  HDA-3-1
  HDA-31-1
  HDA-32-1
  HDA-33-1
  HDA-34-1
  HDA-35-1
  HDA-36-1
  HDA-39-1
  HDA-40-1
  HDA-41-1
  HDA-42-1
  HDA-43-1
  HDA-44-1
     HDA-45-1
  HDA-46-1
  HDA-47-1
  HDA-48-1
  HDA-49-1
  HDA-50-1
  HDA-51-1
  HDA-52-1
  HDA-53-1
  HDA-54-1
  HDA-55-1
  HDA-56-1
  HDA-57-1
  HDA-58-1
  HDA-59-1
  HDA-60-1
  HDA-6-1
  HDA-61-1
  HDA-62-1
  HDA-63-1
  HDA-64-1
  HDA-66-1
  HDA-67-1
  HDA-68-1
  HDA-69-1
  HDA-70-1
  HDA-7-1
  HDA-71-1
  HDA-72-1
  HDA-73-1
  HDA-74-1
  HDA-75-1
  HDA-75X-1
  HDA-76-1
  HDA-77-1
  HDA-78-1
  HDA-79-1
  HDA-80-1
  HDA-82-1
  HDA-83-1
  HDA-84-1
  HDA-85-1
  HDA-86-1
  HDA-87-1
  HDA-88-1
  HDA-89-1
  HDA-90-1
  HDA-9-1
  HDA-91-1
  HDA-92-1
  HDA-93-1
  HDA-95-1
  HDA-96-1
  HDA-97-1
  HDA-98-1
  HDA-99-1

 HD-1-1
  HD-11A
  HD-12-1
  HD-20-1
  HD-2-1
  HD-24A
  HD-24B
  HD-30-1
  HD-3-1
  HD-4-1
  HD-43-1
  HD-44-1
  HD-48-1
  HD-5-1
  HD-51-1
  HD-52-1
  HD-55-1
  HD-56-1
  HD-6-1
  HD-7-1
Title: Re: Carbs on 357 359
Post by: wisecobandit on August 10, 2013, 05:53:22 pm
1 of my 357's has the 175 carb on and it did suffer the 199 issue as it has the same port. All fixed now tho  ;D

Its an early 2003 saw and has the spacer block. Cant say I enjoyed the zama I bought to replace it and now refitted it and the saws back to its old self and will 4 stroke again. The zama has just been stuck back in its box....
Title: Re: Carbs on 357 359
Post by: Cut4fun . on August 10, 2013, 06:58:31 pm
I got a 175 here I'm not going to use.  Was a back up carb to my 199's.  Sat so long the choke shaft got to where it wouldnt move, so pulled it out to clean back up.  If anyone interested in it.
Title: Re: Carbs on 357 359
Post by: 660magnum on August 10, 2013, 10:06:12 pm
The HDA-175 directly cross references to the HDA-199 on the Walbro site and they have the same 16.66mm venturi.

I've seen this HDA-175 and it looks like a HDA-199

It has all the same HDA differences on the metering valve side just like the HDA-199
Title: Re: Carbs on 357 359 fix?
Post by: KilliansRedLeo on August 12, 2013, 10:26:28 am
There was a member on this or another site that would fix the 199 problems for a small fee. Anyone have his contact info?
Title: Re: Carbs on 357 359
Post by: Cut4fun . on August 12, 2013, 10:53:14 am
There was a member on this or another site that would fix the 199 problems for a small fee. Anyone have his contact info?

Scott's thread here too.  http://chainsawrepair.createaforum.com/ported-saws/hda-carb-fix/     Also is $30 now which includes return shipping.
Title: Re: Carbs on 357 359
Post by: SawTroll on August 13, 2013, 01:31:32 am
HDA and HD carb specs

 ......

Venturi
11.11
12.7
13.49
14.29/15.08
15.88/16.77
.....


At least one HD carb has a 17.46mm venturi (HD-12).

Stuff was left out on purpose on list.

Niko I dont remember what was pulled back when the post was made but we were looking up 357 359 carbs.  12 was on 372 wasnt it??? Look at thread title was just comparing them for 357 359.

Be my guest to go through them all if you like.   ;) ;D

 ...... 

No thanks - but I see why you didn't list the larger ones now..... ;D
Title: Re: Carbs on 357 359
Post by: Cut4fun . on August 23, 2013, 01:01:29 pm
I got a 175 here I'm not going to use.  Was a back up carb to my 199's.  Sat so long the choke shaft got to where it wouldnt move, so pulled it out to clean back up.  If anyone interested in it.

The 175 is gone.