Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Husqvarna => Topic started by: reynog on May 16, 2012, 07:28:15 pm

Title: 346XP price check
Post by: reynog on May 16, 2012, 07:28:15 pm
Is $350 a decent price for a used 346XP?
Title: Re: 346XP price check
Post by: Cut4fun . on May 16, 2012, 07:37:06 pm
It would have to be like brand new 50cc NE version.

I was buying them for $395-$415 new in winter 2009 to spring 2010.
Title: Re: 346XP price check
Post by: reynog on May 16, 2012, 09:06:15 pm
How do I tell the size and version?
Title: Re: 346XP price check
Post by: Cut4fun . on May 16, 2012, 09:11:14 pm
primer bulb on left side. grey clutch cover.  De-comp is a few off the top of my head.  sticker will say 50ccc.
Title: Re: 346XP price check
Post by: rms61moparman on May 16, 2012, 09:54:19 pm

I can buy a new one for just a few $$$ more + Shipping. (The shipping is VERY reasonable too)


Mike
Title: Re: 346XP price check
Post by: Adirondackstihl on May 16, 2012, 10:08:07 pm
Brand @ my local dealer......$485
Sticker price was well over $500

For $395-$415......you sure you were buying a Chinese knock-off ;D

I saved some dough and bought mine from nmurph ;)
Title: Re: 346XP price check
Post by: nmurph on May 16, 2012, 10:42:40 pm
I bought my first one for about $400, but that was almost 3 years ago and didn't include a bar/chain.

OP, I can turn you on to a nice 346!
Title: Re: 346XP price check
Post by: tlandrum2002 on May 16, 2012, 11:04:44 pm
400 pho plus shipping brand new in the box
Title: Re: 346XP price check
Post by: reynog on May 23, 2012, 10:11:30 am
Thanks for the replies. I picked it up for $275 OTD.
Good condition, just over 150 psi compression, starts real easy. Biggest issue is that the chain is kind of dull.
Title: Re: 346XP price check
Post by: Cut4fun . on May 23, 2012, 01:53:56 pm
Thanks for the replies. I picked it up for $275 OTD.
Good condition, just over 150 psi compression, starts real easy. Biggest issue is that the chain is kind of dull.

You did good. Thats right where I told you it should go for used in PM. $250-$300.  8)
Title: Re: 346XP price check
Post by: nmurph on May 24, 2012, 12:56:29 am
$275 isn't a bad price, but I will tell you that saw has already lost at least 10psi of compression, assuming of course the reading is good.