Chainsaw Repair

I see 44 pages of instructions on how to take each assembly apart.

Replacing the springs
If the chain moves at engine speeds below 3200 rpm,
replace the springs (024.184.021).
Remove and replace the springs with needle-nose
pliers.
Insert the centrifugal weights with the “
TOP
” lettering
towards the outside.
Careful! The springs can fly out and cause injury.
Assembly note: Disassemble the starter assy to
prevent a damage of the starter ratchets.
Push the disc washer
1
into the clutch.
Use the assembly wrench (944.500.570) to tighten
the clutch.
The lug
3
of the clutch drum should not be on the
arms of the oil pump drive
2
.
Replace the muffler gasket
4
(965.531.130