Author Topic: Husqvarna 357 Carb Service Bullitin (Read 650 times)

660magnum · « **on:** August 12, 2012, 11:38:27 pm »

I'm trying to see if the PDF will Upload?

This is for the 357XP Zama carb

660magnum · « **Reply #1 on:** August 12, 2012, 11:40:51 pm »

Seems to upload and work just fine but the file is only 148KB

Cut4fun . · « **Reply #2 on:** August 13, 2012, 10:20:40 am »

I can upload the small files.

It's the ones that are 4000-9000kb that error after uploading. I even allow the space for saving them that big here on a 1 time bases.

660magnum · « **Reply #3 on:** August 13, 2012, 10:36:56 am »

The server is probably reseting before they get fully loaded?

Cut4fun . · « **Reply #4 on:** August 13, 2012, 11:33:50 am »

Quote from: 660magnum on August 13, 2012, 10:36:56 am

The server is probably reseting before they get fully loaded?

I have no clue on that stuff. So you are saying to upload and leave a link that shows error on download for how long for it to reset?

660magnum · « **Reply #5 on:** August 13, 2012, 02:24:01 pm »

If the server resets on you, AFAIK you are done. The task faults out and doesn't work.

The must be some way to keep the task going?

I tried up loading a 500K one and it faulted out saying the limit was 300K

nmurph · « **Reply #6 on:** August 13, 2012, 02:47:49 pm »

Be aware that the change on the Husky production line started several months earlier. I believe Bob said it was about 7 months earlier in this case.

Cut4fun . · « **Reply #7 on:** August 13, 2012, 03:29:59 pm »

Quote from: 660magnum on August 13, 2012, 02:24:01 pm

I tried up loading a 500K one and it faulted out saying the limit was 300K

Yes that is the normal setting I allowed. 300k per attachment x 4 for total of 1200 per post.

I have control over file sizes and when I am doing a big file I change the settings to allow for the big file to be uploaded.

I pay $$ for the attachment space used. Usually buy a chunk at a time. When I started the site I only got a small chunk for free and then bought a bigger chunk that is only half way through so far.

Chainsaw Repair

News:

Author Topic: Husqvarna 357 Carb Service Bullitin (Read 650 times)

660magnum

Husqvarna 357 Carb Service Bullitin

660magnum

Re: Husqvarna 357 Carb Service Bullitin

Cut4fun .

Re: Husqvarna 357 Carb Service Bullitin

660magnum

Re: Husqvarna 357 Carb Service Bullitin

Cut4fun .

Re: Husqvarna 357 Carb Service Bullitin

660magnum

Re: Husqvarna 357 Carb Service Bullitin

nmurph

Re: Husqvarna 357 Carb Service Bullitin

Cut4fun .

Re: Husqvarna 357 Carb Service Bullitin

Related Topics